|
|
Post by Eyrey1 on Oct 5, 2013 15:45:57 GMT 1
picked up my ypvs today and this is in the box  inside |
|
|
|
Post by oldelsieboy on Oct 5, 2013 16:20:34 GMT 1
Looks like an LC Pro-Am nose fairing.
OEB
|
|
|
|
Post by mudplug69 on Oct 5, 2013 16:23:04 GMT 1
Nice! pro am fairing off rd lc if its plastic your on a winner its a brearly smith bonus does it have brackets etc?
|
|
|
|
Post by winnerevo1 on Oct 5, 2013 16:56:44 GMT 1
It is an original Yamaha supplied LC pro-am fairing, fitted with LC2 decals. There are a few bits missing from it though unless they are in the box.
|
|
|
|
Post by Eyrey1 on Oct 5, 2013 20:11:40 GMT 1
|
|
|
|
Post by ulsta on Oct 5, 2013 20:19:41 GMT 1
|
|
|
|
Post by Eyrey1 on Oct 5, 2013 20:25:22 GMT 1
 and this ! are they worth anything ? |
|
|
|
Post by ulsta on Oct 5, 2013 20:32:23 GMT 1
The fairing looks to be the genuine plastic one, its sought after and worth a couple of bob. The belly pan looks to be fiberglass, new ones are about £60 I think so its still going to be worth a few quid to someone.
Do you have any of the brackets ?
|
|
|
|
Post by ulsta on Oct 5, 2013 20:40:09 GMT 1
If you've got the infill's then their realy quite rare.  |
|
|
|
Post by Eyrey1 on Oct 5, 2013 20:49:01 GMT 1
no no infills
i think the inside has been cut a bit to fit ypvs kidney clocks ?
not the ones that go round the fork tops but might be in the box
they are no good to me ive got a ypvs ,
but need a bell pan for a 31k lc2
some handlebars and rear caliper ,rear brake servo and switch
if anyone wants a swap ?
|
|
|
|
Post by blyth1970 on Oct 5, 2013 21:00:51 GMT 1
What type of handle bars, and how much do you want for them ?
|
|
|
|
Post by winnerevo1 on Oct 5, 2013 22:34:04 GMT 1
If you've got the infill's then their realy quite rare. Do you have these? |
|
|
|
Post by ulsta on Oct 5, 2013 23:12:27 GMT 1
If you've got the infill's then their realy quite rare. Do you have these? I wish. would love to get hold of a pair to make up moulds for fibreglass ones. |
|
|
|
Post by winnerevo1 on Oct 5, 2013 23:44:19 GMT 1
I wish. would love to get hold of a pair to make up moulds for fibreglass ones. I've got a complete new in the box pro-am kit. If someone would be willing to mould plastic ones I'd probably allow moulds to be made from mine because I need a pair for a used kit I've got. |
|
|
|
Post by ulsta on Oct 6, 2013 0:48:51 GMT 1
Who does Norbo's panels and mudguards ? perhaps he could get some made ?
I remember reading about a company in the uk who can re-manufacture abs panels for bikes. cant mind who it was though.
|
|
|
|
Post by Eyrey1 on Oct 6, 2013 1:15:26 GMT 1
if enough people want them i should think norbo would get them made !
probably in fiberglass .
|
|
|
|
Post by winnerevo1 on Oct 6, 2013 8:50:43 GMT 1
I wouldn't be interested in fibreglass ones, not on a genuine fairing. Whoever makes the replacement (plastic) side panels & rear mudguards would be the best bet.
|
|
|
|
Post by markhoopy on Oct 6, 2013 10:30:29 GMT 1
no no infills i think the inside has been cut a bit to fit ypvs kidney clocks ? not the ones that go round the fork tops but might be in the box they are no good to me ive got a ypvs , but need a bell pan for a 31k lc2 some handlebars and rear caliper ,rear brake servo and switch if anyone wants a swap ? I've got a 31K belly pan somewhere that's in good nick but will need paint. Fairly sure I have a complete rear brake too. Shame I don't have any need for a bikini fairing but if you're happy to use long bolts or something for footrests and give me yours we might have a deal  |
|
|
|
Post by mentalist on Oct 6, 2013 13:06:44 GMT 1
A lot of companies these days can 3D scan the parts and then just print them on a 3D printer in plastic
|
|
morty
L plate rider.
Posts: 11
|
Post by morty on Oct 7, 2013 18:19:44 GMT 1
14cheeks did the side panels for the ypvs I wouldn't be interested in fibreglass ones, not on a genuine fairing. Whoever makes the replacement (plastic) side panels & rear mudguards would be the best bet. |
|
|
|
Post by kennyroberts on Oct 7, 2013 20:16:30 GMT 1
Im a grp mouldmaker and laminator...!............just sayin!
|
|
