|
Post by brian1111 on Aug 21, 2013 22:08:22 GMT 1
hi all just thought id share some pics with you of my 1982 Yamaha rd250lc now its nearly done just a few little bits to do has you will see in the pictures she came out of a hedge where she had been for 20 year she had lots of ivory growing around and in her think shes looking good now what do u all think had loads of trouble putting photos on so they aren't in order s1102.photobucket.com/user/briang1111/library/rd250lc
|
|
|
Post by seahorse83 on Aug 22, 2013 0:01:28 GMT 1
Very Nice work Brian, looks fantastic, one of the better before and afters.
|
|
|
Post by phil916 on Aug 22, 2013 8:09:50 GMT 1
Very very nice!! I like it a lot!
|
|
|
Post by arrow on Aug 22, 2013 14:38:51 GMT 1
Very nice, you done a cracking job of it.
|
|
|
Post by crash on Aug 22, 2013 16:00:02 GMT 1
agreed superb before and after pics
|
|
|
Post by jollyjoiner on Aug 22, 2013 16:16:09 GMT 1
Nice job, bike looked a right state
|
|
|
Post by johna on Aug 22, 2013 17:33:49 GMT 1
top job there brian well done mate.
|
|
|
Post by rickbrown01 on Aug 22, 2013 19:03:49 GMT 1
Looks great, where did u get the paintwork done for the bodywork?
|
|
|
Post by brian1111 on Aug 23, 2013 15:07:31 GMT 1
Thanx for all the comments took lots of pics got around 300 of the rebuild cos I like to look through everyone else's pics of there rebuilds from start to finish this is my 1st build hope to see some of u at the rallies when she's completely finished paintwork was done by Terry's racepaint uk of Eastwood
|
|
|
Post by steve h on Aug 23, 2013 15:12:58 GMT 1
|
|
|
Post by lcyoungboy on Aug 24, 2013 15:41:41 GMT 1
That's some transformation dude :-) ..top job..and I love the clocks ..did ya do them yourself?
|
|
|
Post by 2strokesmoke on Aug 26, 2013 19:49:32 GMT 1
Amazing job, looks the mutts nutts and those clocks look so good too, where they done by you or did you send them to a company? quite fancy something like that on mine .
|
|
|
Post by brian1111 on Aug 28, 2013 8:44:39 GMT 1
Hi sorry for slow replies been to cadwell for weekend and had no Internet the clocks I have done myself got the clock faces off norbo off here they just stickers and then I just put blue led bulbs in the back but when u take clock to bits to put stickers on inside the white plastic there's 2 steel things that shield the bulb u have to take those out or the led bulbs don't shine bright enough but really easy to do the needles are a bit fiddly to take off but before u take them off lift ur needle up slightly over the peg they lean against and let them settle make a note of where they have settled and when u put them back on put them on in that position and then u just slightly lift it back over the peg hope this helps you all ?
|
|
|
Post by lovelydog on Sept 7, 2013 7:47:40 GMT 1
Fabulous build mate,love the pics. I'm doing a 250 at mo and will put pics up when complete. I've gone for red hoses,but where did you get the oil pipe from oil tank to pump? that blue one looks ace.
|
|
|
Post by skydemon on Sept 7, 2013 19:14:56 GMT 1
I love the black grab rail. Looks mean!!!!
|
|
|
Post by jon on Sept 7, 2013 20:28:56 GMT 1
Very nice hybrid.
I toyed with the idea of painting mine with RD250LC logos, as that is what it was originally.
My mate has a very original looking RD250LC with RD250LC logos, but it has 350 barrels.
In the end I thought I'd go for RD350LC logos, as mine is hardly standard (like yours).
|
|
|
Post by northernmonkey on Sept 7, 2013 20:46:38 GMT 1
Like it
|
|
|
Post by brian1111 on Sept 8, 2013 0:15:06 GMT 1
Hi all thanx for the comments the blue pipe I got off eBay couldn't tell you the sellers name has had it a while has for the logos I've gone with 250 has mine is a 250 originally still got 250 barrels on but had sleeves pushed out and had 375 sleeves pushed in so still registered has a 250 happy days thanx Bri xxx
|
|
stevep
Thrash Merchant
Posts: 396
|
Post by stevep on Sept 11, 2013 22:31:08 GMT 1
Great transformation , some serious work and effort gone into you build what are the forks and yokes off ? , I am building a hybrid 350ypvs i have some rgv forks and having trouble finding yokes
|
|
|
Post by brian1111 on Sept 12, 2013 22:19:23 GMT 1
Hi stevep glad u like the bike I'm running rgv forks I've stripped them and had them anodised black and the yokes was made by a company called metmachex engineering and they are made from billet aluminium and made to fit my ignition and clocks hope this helps thanx Bri
|
|
cuzza
Weekend rider
Posts: 56
|
Post by cuzza on Sept 13, 2013 23:40:42 GMT 1
Looks great fella - well done!
|
|