|
|
Post by xero on Jan 17, 2013 19:05:54 GMT 1
Hi all, you know when in the clutch theirs the 2 rods with a ball bearing in the middle.. does anyone know what size ball bearing it is as I have lost the one for my engine so ill need to replace it but not sure what size it is.. THANKS in advance!  |
|
|
|
Post by billy on Jan 17, 2013 23:13:44 GMT 1
4,73 mm. |
|
|
|
Post by xero on Jan 18, 2013 1:37:52 GMT 1
Thanks ALOT! will go to B&Q or something to try source one out. |
|
|
|
Post by billbott on Jan 18, 2013 8:34:51 GMT 1
4,73 mm. ...Or 3/16" in old money ;D You'd be best off trying an engineers merchants. |
|
|
|
Post by Tone on Jan 18, 2013 14:29:01 GMT 1
If no joy try cycle shops as they are fitted to a lot of the front wheel hubs on mountainbikes.
|
|
|
|
Post by xero on Jan 18, 2013 14:44:50 GMT 1
Thanks for the advise guys, dads just informed me theirs a bearing shop a couple of miles away so ill give them a call see if they have one  |
|
