|
|
Post by raven13 on Nov 6, 2012 14:01:36 GMT 1
ive had to change my indicators again as i managed to break 2 of them, bought a very similar style (non led) but these ones wont flash. will however flash if the relay is tapped. they flashed fine before i changed them.
any suggestions??
|
|
|
|
Post by steve h on Nov 6, 2012 16:56:45 GMT 1
Are they the same wattage as the ones that broke? (a toffe hammer could be used to encourage the unit to operate if you hit it every second when you approach a junction) If your arms are'nt long enough check all the usual things, but first make sure they the same wattage. Steve
|
|
|
|
Post by Norbo on Nov 7, 2012 9:28:38 GMT 1
normaly with LED you need a speciel flasher can as they are a low watage
|
|
|
|
Post by raven13 on Nov 7, 2012 21:31:53 GMT 1
normaly with LED you need a speciel flasher can as they are a low watage these are non led norbo....... |
|
|
|
Post by mellow on Nov 7, 2012 22:00:32 GMT 1
had the same with mine.swapped the flasher relay with a different one and it worked  |
|
|
|
Post by raven13 on Nov 7, 2012 22:05:22 GMT 1
will give that a go mell cheerz dude
|
|
|
|
Post by Norbo on Nov 8, 2012 9:59:16 GMT 1
But are they still a low watage most flashers are 60W and the minneys are a lot lover
|
|
|
|
Post by raven13 on Nov 24, 2012 19:48:25 GMT 1
all sorted now. new relay
|
|
