|
|
Post by porkyhorse on Nov 5, 2012 20:45:48 GMT 1
Hi I have a mark 1 with a 12 a carb. I need some help I have noticed the slide is returning automatically , I've tried a little bit of grease on Friday which worked but over the weekend it's started sticking again. Has anybody had this problem
|
|
|
|
Post by jollyr6 on Nov 5, 2012 23:37:32 GMT 1
Have u checked yer needle isn't slighting bent had same probs with my 2ma changed it and all ok now ;D hope this helps
|
|
|
|
Post by porkyhorse on Nov 6, 2012 8:40:50 GMT 1
It looks staight that's what is confusing
|
|
|
|
Post by Norbo on Nov 7, 2012 9:27:12 GMT 1
could be the cable inside frayed and catching on the inside.
|
|
|
|
Post by porkyhorse on Nov 7, 2012 19:26:34 GMT 1
Thanks the cable is fine , but I have taken the throttle apart and dropped a little 3in1 down the cable and it seems to have sorted it out . So a couple of little things can cause a bigger problem but fingers crossed that's all it needed
|
|
