|
Post by scottie58 on Oct 24, 2012 19:14:42 GMT 1
does anybody know the pitch of the thread? M14 is correct dia.
I want to buy a stainless nylock type nut to give more clearance for my Microns as OE castlelated nut has worn a groove in it! (previous owner )
cheers
|
|
|
Post by woodentopp on Oct 26, 2012 6:34:48 GMT 1
Not sure of the pitch but I think it's a standard metric fine thread.
|
|
|
Post by robin on Oct 28, 2012 19:48:41 GMT 1
M14 x 1.5mm on my Metmachex, some nice stainless steel nylocks on Ebay, but even then I machined 3-4mm off the back face, same issue as yourself.
I have a pair of grooves in standard pipes! - :-)
Robin
|
|