|
Post by rwebster on Sept 13, 2012 5:27:59 GMT 1
hello folks looking for suggestions on which company or persons to get for a partial resto on my 31k bike the bike has only done 3500 miles was dropped in 1995 and stuck in a shed since all the bits that were damaged i have already . so just looking for someone to strip clean and general tidy up as i dont have time to do it myself .any suggestions tele numbers websites will be much appreciated. by the way im in middle of scotland so dont mind traveling a bit but midlands would be about it
cheers the now rod
|
|
|
Post by raven13 on Sept 13, 2012 8:19:01 GMT 1
|
|
|
Post by lcrider on Sept 13, 2012 9:13:20 GMT 1
welcome to the forum mate . Even if you cant fined anyone to do it for you they are simple to work on .
|
|
|
Post by rwebster on Sept 13, 2012 10:23:22 GMT 1
hi guys tried to open up the link raven couldnt get it to open lc rider i just dont have the time to do it just finished rd200 have rd250 and 125 in shed both needing a resto but would like p/valve on road for next year
|
|
|
Post by raven13 on Sept 13, 2012 11:31:51 GMT 1
sorry mate you need to have made 25 posts before you can see that section. my bad. but i posted your message on his thread so he will se it. get some more comments made. go into the projects and restorations and you will soon get up to 25 posts
|
|
|
Post by bigal1 on Sept 13, 2012 14:58:12 GMT 1
i would do this if i had the time but i have just taken on a hybrid job for myself that will take me 12 months ... i hope
|
|
|
Post by nikfubar on Sept 13, 2012 17:24:29 GMT 1
I'd do it but I'm over 500 miles away
|
|
|
Post by midlifecrisisrd on Sept 13, 2012 20:54:36 GMT 1
when you say strip and partial resto what exactly are you looking for doing?
i am just outside glasgow (Cumbernauld) and may be interested in a winter project to keep me busy. depends on how much needs done as don't want a full time job, just a few hours a week. done some hybrids over the last few years (31k twice and an N2) so a standard one should not be a problem.
Steve
|
|
|
Post by dushka59 on Sept 19, 2012 12:25:48 GMT 1
Try getting a hold of Andy Holmes (trigg) on the 'other' forum. he finished off my 31K when i was ready to throw in the towel....great guy and very reasonable prices!!!
Patrick
|
|
|
Post by midlifecrisisrd on Sept 19, 2012 15:03:39 GMT 1
Try getting a hold of Andy Holmes (trigg) on the 'other' forum. he finished off my 31K when i was ready to throw in the towel....great guy and very reasonable prices!!! Patrick I did not get any response to my query Steve
|
|
|
Post by Norbo on Sept 21, 2012 8:32:07 GMT 1
I think id midlifecrisisrd is happy to have a look at it id get in tuch, you cant do better then a trusted forum member to work on a bike
|
|
Wez350
Drag-strip hero
Posts: 283
|
Post by Wez350 on Sept 26, 2012 23:41:24 GMT 1
I would second Norbo on that
|
|
|
Post by rwebster on Sept 28, 2012 14:58:25 GMT 1
hi guys sorry its taken so long for me to get back to you was on my hols in thailand (plenty of other things to do there lol) im now back to work im still looking for someone to do a resto job on my powervalve and as norbo says you want guys that know what they are on about doing it . if there is anybody out there willing can they message me an email or telephone number i will be going offshore as from monday but will be back about 10 days later . i will be back in uk on 25th oct so would be willing to throw it in trailer and let some of you guys who have done this before look at it . cheers rod
|
|
|
Post by midlifecrisisrd on Sept 28, 2012 15:37:46 GMT 1
hi guys sorry its taken so long for me to get back to you was on my hols in thailand (plenty of other things to do there lol) im now back to work im still looking for someone to do a resto job on my powervalve and as norbo says you want guys that know what they are on about doing it . if there is anybody out there willing can they message me an email or telephone number i will be going offshore as from monday but will be back about 10 days later . i will be back in uk on 25th oct so would be willing to throw it in trailer and let some of you guys who have done this before look at it . cheers rod Pm'd email address for details Steve
|
|