|
|
Post by hardhatharry on Jul 2, 2012 23:30:07 GMT 1
Hi all
I have had to go to +2mm overbore (see build post) how to I work out what my engine displacement is?
Cheers
|
|
cj
Thrash Merchant
Posts: 418
|
Post by cj on Jul 3, 2012 0:18:38 GMT 1
been to the pub so someone check me
Standard
3.1416/2 = 1.5708
6.4 x 6.4 = 40.96
1.5708 x 40.96 = 64.339968
64.339968 x 5.4 = 347.4358272cc
Oversize
3.1416/2 = 1.5708
6.6 x 6.6 = 43.56
1.5708 x 43.56 = 68.424048
68.424048 x 5.4 = 369.4898592cc
|
|
|
|
Post by marsbar350 on Jul 3, 2012 0:23:05 GMT 1
|
|
|
|
Post by hardhatharry on Jul 3, 2012 9:13:14 GMT 1
thats cool!!
|
|
|
|
Post by fatbloke on Jul 3, 2012 9:44:22 GMT 1
Too clever for me!!
The answer I got to was 2 apples??
|
|
