|
Post by chamber66 on May 5, 2012 8:24:52 GMT 1
|
|
|
Post by rdstars on May 5, 2012 11:00:05 GMT 1
Yep, do it yourself There was a complete write up on the TZR250 forum before it went belly up, it does work a treat and is easy to do. Basically what you do is cut a few tracks on the board and in place you solder a dill switch in place to control your pv. BIT more technical than that but not much more. I ordered a load of switches of ebay when I done mine as it worked out not much more than the price of one, so I do have a fair few sat hear.
|
|
|
Post by midlifecrisisrd on May 5, 2012 11:41:54 GMT 1
I have one already modded by that bloke and works well.
Will be buying a full zeel as I need to alter my ignition curve so will be selling the one I've got.
It's a 1UA controller with 31k connector but easily changed back.
£50 plus post if any one is interested. Available soon.
Steve
|
|