|
|
Post by marsbar350 on Feb 10, 2012 19:29:55 GMT 1
hi guys took some parts to be plated last week and heres the results   loosley fitted to the shock rotated in my photobucket album but not here    |
|
|
|
Post by scott on Feb 10, 2012 20:09:56 GMT 1
very nice 8-)whats the goldish colour plating called
|
|
|
|
Post by marsbar350 on Feb 10, 2012 20:32:26 GMT 1
scott , its yellow passivate |
|
|
|
Post by arrow on Feb 10, 2012 21:26:25 GMT 1
Shock looks like a new 'un. |
|
gsexr
Thrash Merchant
Posts: 352
|
Post by gsexr on Feb 11, 2012 11:20:24 GMT 1
that looks good mate, what sort of costings are we looking at roughly
|
|
|
|
Post by mellow on Feb 11, 2012 18:26:04 GMT 1
luvverly jubbley m8 |
|
|
|
Post by marsbar350 on Feb 11, 2012 18:27:36 GMT 1
that looks good mate, what sort of costings are we looking at roughly all the replated parts cost huhem........... £5 ;D |
|
|
|
Post by andyburts on Feb 11, 2012 19:13:04 GMT 1
very nice :-) ... how do you fit the coil spring ? i havnt got any spring clamps . a friend said to do it with tie wraps but i dont want to scratch the fresh powder coat ... cheers .. andy
|
|
|
|
Post by marsbar350 on Feb 11, 2012 19:28:20 GMT 1
very nice :-) ... how do you fit the coil spring ? i havnt got any spring clamps . a friend said to do it with tie wraps but i dont want to scratch the fresh powder coat ... cheers .. andy i was toying with buying some spring clamps for £30 or i could take to the bike shop i use who do them for £3 |
|
|
|
Post by andyburts on Feb 11, 2012 21:46:44 GMT 1
done it :-) , held bottom bush in vice , pry bars under top washer bit & push down on the spring with pry bar , get laddo to cram top zincky half washers in ,, hey presto :-)
|
|
