|
Post by midlifecrisisrd on Dec 20, 2011 21:08:53 GMT 1
Biggest problem is usually wear or pitting where the seal lip sits causing it to leak.
If in doubt replace it. Had 2 unmarked ones but still bought one of the alloy ones for my build just so it was new
Steve
|
|
|
Post by Norbo on Dec 22, 2011 14:00:11 GMT 1
The front of the shaft look worn to me If you look infront of were the bearing is fitted
|
|
|
Post by midlifecrisisrd on Dec 22, 2011 15:34:03 GMT 1
The front of the shaft look worn to me If you look infront of were the bearing is fitted I thought that as well, right where the seal sits. Steve
|
|