|
Post by Witterz on Nov 19, 2011 23:44:37 GMT 1
Hi All, Can anyone explain the following. I have an early 4LO and the foothangers seem to be different to any I have seen before. One of the holes that is cast in the hanger is filled in with a bolt hole in the middle. All hanger I have seen before have all the holes fully open. I have attached photos to explain better. Any explanations greatly appreciated. Paul.
|
|
|
Post by scott on Nov 19, 2011 23:47:20 GMT 1
hi paul,they have had rear sets fitted m8,looks like you should beable to knock that out from the face side,can't see any welding on em.
|
|
|
Post by Witterz on Nov 19, 2011 23:59:16 GMT 1
Hi Scott,
Thanks for the quick info.
I will have a go at knocking them out tomorrow. Appreciate your help !!
Where abouts in the west mids are you ? I'm in Tamworth.
ATB
Paul.
|
|
|
Post by scott on Nov 20, 2011 0:03:50 GMT 1
Hi Scott, Thanks for the quick info. I will have a go at knocking them out tomorrow. Appreciate your help !! Where abouts in the west mids are you ? I'm in Tamworth. ATB Paul. yes paul i will update where i am,i'm in rushall, walsall m8 so not that far away.
|
|
|
Post by Witterz on Nov 20, 2011 0:13:39 GMT 1
Thanks Scott,
Good to know there's a fellow LC forum member on the doorstep.
My mom lives in Aldridge by the White house, & I work in Walsall, so Rushall is just down the road.
Will have to catch up some time.
Cheers,
Paul.
|
|
|
Post by scott on Nov 20, 2011 0:19:08 GMT 1
Thanks Scott, Good to know there's a fellow LC forum member on the doorstep. My mom lives in Aldridge by the White house, & I work in Walsall, so Rushall is just down the road. Will have to catch up some time. Cheers, Paul. yes m8 i've got no probs u poppin down if u want,not far from the whitehouse paul,past linley woods,turn right at the royal oak and just down the road m8.theres also quite afew members not too far away paul.
|
|
|
Post by Witterz on Nov 20, 2011 0:37:37 GMT 1
Thanks Scott, its always good to know, and to bounce ideas off some-one....
I'm new on this forum, and fancied a change from the RD/RZ forum, as I'm in the middle of 1st 4LO rebuild. more to it than I thought !!!!
|
|
|
Post by scott on Nov 20, 2011 0:47:08 GMT 1
well thats what the forum is all about paul,helpin people out where we can,tbh m8 i'm crap with the tech stuff but if i can help in any other way i will.i will go in me cold damp shed and take pic's of frame mounts and measure bits i have to help out in my way,loads of tech heads on here so should get all the info u need m8
|
|
|
Post by Witterz on Nov 20, 2011 0:55:22 GMT 1
Well Scott, you answered my hanger question which was something I didnt think of !! Will pm you sometime for a meet up.
|
|
|
Post by scott on Nov 20, 2011 0:58:13 GMT 1
ok paul no probs
|
|
jonniebick
Drag-strip hero
Nice Bike...How fast duz it goo mister????
Posts: 246
|
Post by jonniebick on Nov 24, 2011 0:09:01 GMT 1
Hey Scott, My family comes from Rushall, my dad still lives there. My sister used to run the Boat and then Royal Oak.. So closer than you think ehh!!
|
|
higgsy
Thrash Merchant
Posts: 458
|
Post by higgsy on Nov 24, 2011 2:40:46 GMT 1
Hi Paul, I could really do with those plugs if you don't need them, the ones on my race bike have disintergrated :-(
Cheers
Higgs
|
|
|
Post by Witterz on Nov 25, 2011 22:51:53 GMT 1
Hi Higgsy,
No probs, PM me your details.
ATB Paul
|
|
|
Post by scott on Nov 25, 2011 23:15:55 GMT 1
Hey Scott, My family comes from Rushall, my dad still lives there. My sister used to run the Boat and then Royal Oak.. So closer than you think ehh!! well they say it's a small world jonnie :Dain't a pub drinker but me mom and dad used to go in the oak not so long ago,where they the last one's there,heard it's gunna be one of them indian meal pubs now.
|
|
higgsy
Thrash Merchant
Posts: 458
|
Post by higgsy on Nov 26, 2011 0:16:35 GMT 1
Nice one Paul, helped me out no end :-)
|
|