Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 6, 2011 13:59:33 GMT 1
hi has anyone on here got some rd 400 e/f carbs they are willing to part with or know anyone that has some or does anyone of other carbs that will fit ie lc350 or so on
any help or advice accepted
cheers johnny 485
|
|
|
|
Post by canucklehead on Nov 7, 2011 17:52:13 GMT 1
I have RZ350 carbs on my RD400 as that's what they came with. They are a little hard to set up but they work fine. I found they work better keeping the balance tube in place (they didn't have that when I got the bike) I run a slightly larger pilot jet and 165 mains with the needle on the lowest setting but I live up quite high and find that works for me. I'd love to put the bike on a dyno and experiment further with the jets and get the optimal...Anyhow, rd350's or rz350s will work on the RD400 but they do need some work to set up.
Canucklehead
|
|
|
|
Post by Paul Dawkins on Nov 7, 2011 18:42:26 GMT 1
2R9 carbs are hard to come by but RDbreaker should have a set.
Call Andy on 07725008024 or ask on the Aircooled RD forum.
|
|
hazey
Thrash Merchant
Posts: 391
|
Post by hazey on Mar 22, 2012 23:57:54 GMT 1
RD 250e/f carbs will be easier to find,just change all the jetting/emullsion tube/needle to 400 spec  |
|
|
|
Post by arrow on Mar 23, 2012 0:44:35 GMT 1
RD 250e/f carbs will be easier to find,just change all the jetting/emullsion tube/needle to 400 spec The fixed (non removeable) air jet is a different size matey.  |
|
hazey
Thrash Merchant
Posts: 391
|
Post by hazey on Mar 23, 2012 9:08:14 GMT 1
Nothing a quick ball removal and drilling won't sort bud
|
|
|
|
Post by oldrduser on Mar 24, 2012 11:39:40 GMT 1
1a3 carb bodies have the same air jet as the 2r9 bodies
|
|
|
|
Post by buckshot on Mar 24, 2012 17:33:47 GMT 1
I know somebody who's running with 1 2R9 and 1 1a3, with correct 2R9 needle, emulsion tube, jets etc. Air jet standard 1a3 and his bike runs fine.
|
|
