front brake

[neil]

hi all, my 125 has mk2 forks, i noticed the stancions were bent after removing them and fitting them back on. i had to turn them in the yokes so the fork bottoms would touch the wheel spacers.
i managed to get some new stancions, but now the brake hangs on abit(its a tzr calliper) ive tried taking it off pushing the pistons back and trying again, but no good. its tight on a full turn of the wheel and disc doesn,t seem bent. any ideas please

[billy]

It sounds like the piston has stuck to the seal, you gotta take it apart and grease it. Use brake caliper grease around the seal and it'll probably work fine (but DON'T use any random grease layin around in the shed, as wrong grease can make the seals swell).

[neil]

thanx chap, i really cant see anything else wrong