|
|
Post by dplb on Jun 28, 2011 11:53:31 GMT 1
Gday Ive got an athena topend on my rz and am having troubles with a flat spot on the needle. started looking into atac chambers that honda used instead of power valves,but im thinking they will be a pain to fit and actuate properly. I was wondering if anyone knew of anything aftermarket available? thanks in advance australia fair ;D
|
|
|
|
Post by Norbo on Jun 29, 2011 9:53:57 GMT 1
If its a race tuned big bore lomas are very good on this type of set up .
|
|
|
|
Post by dplb on Jun 29, 2011 22:43:32 GMT 1
just slapped on the std athena kit 68 bore triple exhuast port but didnt know anything bout two strokes at the time.... wishing i had now I run std 31k carbs banshee reeds airbox cleaned out 27 pilot 280 main middle clip, tried banshee needles, stg 3 dyna needles and cant get rid of this stammer as it comes on the pipes, when it gets there its great signs off at 9k, heaps of low end but in higher gears it struggles to pull through the needle, maybe thats just what i got but I would like to get it perfect;) thanks in advance australia fair
|
|
