|
Post by bertiemollie on Dec 10, 2010 13:05:55 GMT 1
Just won this on ebay. I am pretty sure it is for an RD125lc? cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320626526823&ssPageName=ADMEDiameter 48mm holes and approx 153 between fork centres. I had a measure up of my Mk1 and it looks right. I found this pic on the 125 forum which looks the same too. I'll need to have a look when it turns up but can anyone else confirm it is 100% correct
|
|
|
Post by looey on Dec 10, 2010 17:22:52 GMT 1
Doesn't look like it's for a MK1 to me, cos they have a lip at the top of the clamp area that fits over the top of the lower fork You can see it in the picture in the post that the top is a smaller diameter to the sides and the one on the ebay item pic has flat sides inside that clamp area ?. Could still fit though ?.
|
|
|
Post by bertiemollie on Dec 10, 2010 18:59:28 GMT 1
Doesn't look like it's for a MK1 to me, cos they have a lip at the top of the clamp area that fits over the top of the lower fork HHMMmmm, I guess I'll have to wait till it turns. It is hard to see from the pic if it has a lip or not, there is a slight shadow which might suggest there is.. Does anyone know what should be stamped on the underneath of a Micron 125lc brace?
|
|
|
Post by looey on Dec 10, 2010 19:03:25 GMT 1
You could be right, maybe the lip is there but not easily seen in the picture
|
|
|
Post by Norbo on Dec 10, 2010 20:06:52 GMT 1
Looks like a 125 to me and i can see the lit if you blow the pic up .
|
|
|
Post by bertiemollie on Dec 10, 2010 22:53:45 GMT 1
Looks like a 125 to me and i can see the lit if you blow the pic up . Oooh I do hope SOooo. Be nice to give the old girl some tinsel for crimbo She's had a hard life and bin stuck at the back of a garage for over 10 years. BTW - I am talking bikes here LOL. I know how you lot think.
|
|
|
Post by looey on Dec 10, 2010 23:02:11 GMT 1
Fingers crossed for ya
|
|
|
Post by bertiemollie on Dec 11, 2010 11:21:50 GMT 1
hmmm the mk1 will not fit the mk2 as diameter is different and the muddy mount wont allow it to fit...but the one in the picture does look mk1 and lucky if you have bagged one... Hi Gaz, I just bought a 10W mk1 so I am starting to collect bits even though the mk2 isn't finished yet . Yes I hope I have been lucky as it's NOS too. Cheers Andrew
|
|
|
Post by bertiemollie on Jan 4, 2011 9:46:26 GMT 1
Finally received the brace. It has the lip at the top
|
|
|
Post by looey on Jan 4, 2011 11:18:07 GMT 1
Nice one
|
|
|
Post by simon998 on Jan 4, 2011 18:36:21 GMT 1
Lucky man, Ive been looking one of these at a reasonable price for long before I even owned an LC...
|
|
epic
Weekend rider
Posts: 85
|
Post by epic on Feb 14, 2011 17:14:55 GMT 1
well lucky i'd say because i've just paid 85 quid for mine
|
|
epic
Weekend rider
Posts: 85
|
Post by epic on Mar 2, 2011 13:29:54 GMT 1
Has that brace been put on the right way round with the micron facing forward rather than towards the rider??
|
|