perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Dec 7, 2010 12:44:13 GMT 1
|
|
|
Post by Norbo on Dec 7, 2010 14:24:21 GMT 1
40PHP i dont think so . but it looks like a very start for a build
|
|
perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Dec 7, 2010 16:50:37 GMT 1
The carb says 1AU does anyone know what this is off? Also just noticed that the frame and clipons have been prfessionally painted, new loom and shock and a few other bits and bobs .
|
|
|
Post by mellow on Dec 7, 2010 18:10:12 GMT 1
1UA?? If so thats 350 ypvs F2
|
|
|
Post by LC'Adam on Dec 7, 2010 19:37:23 GMT 1
I talked to the previous owner about this bike on youtube a while back. He told me that it was a 144cc, had a 350 carb, k and n filter and it had a nikkon pipe. He told me also that the reason his 175 kit went was because he didn't put the rings in properly and they snagged in the ports and snapped. Also told me it went 115 mph lol What year is it on the log book and what engine and frame numbers does it have? Looks like it will make a cracking project bike for over the winter Adam
|
|
perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Dec 7, 2010 20:04:57 GMT 1
He told me that it was a 144cc, had a 350 carb, k and n filter and it had a nikkon pipe. He told me also that the reason his 175 kit went was because he didn't put the rings in properly and they snagged in the ports and snapped. Also told me it went 115 mph lol What year is it on the log book and what engine and frame numbers does it have? Looks like it will make a cracking project bike for over the winter Adam It is now running a 175 kit, 350 carb and a unknown exhaust as the nikkon rusted though aparently. The 175 barrel is absolutely fine just needs re ringing. he has gave me the barrel that he claims to be 140ish cc all i know is its 1.5 os. it needs a lot of love and paint on rusted parts
|
|
|
Post by Norbo on Dec 8, 2010 9:04:07 GMT 1
its not 140cc at 1.50 over . i asooom its a young lad you got the bike of with his 115mph bike . LOL
|
|
perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Dec 8, 2010 9:12:22 GMT 1
He was around 35 ish lol its about 133 int it at 1.5 os? what air filter set up should i run with the 175 kit?
|
|
perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Dec 9, 2010 21:47:43 GMT 1
Took the parts to fharon engineering today. Hes putting an IT175 piston and rings, rebore to 2mm o/s, reprofiling the cylinder head, better little end and machined to take a o ring and maybe a few other things. Be a while till i get it back though :/.
|
|
perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Dec 12, 2010 23:58:34 GMT 1
will a 350 f2 carb work well with a o/s 175 kit? not restricted or anything?
|
|
|
Post by Norbo on Dec 13, 2010 7:31:29 GMT 1
an F2 carb would be fine
|
|
perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Feb 27, 2011 21:48:34 GMT 1
Here is the latest picture of my budget RD175LC i would say its about 95% done. I still want a few bits chroming, i would like to spray a few more things and add a pro am and mirrors.
|
|
perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Feb 27, 2011 22:13:38 GMT 1
very nice mate. Carnt take photos like you mate :/ that one of your wrangler is amazing
|
|
|
Post by twostroker on Feb 27, 2011 22:20:54 GMT 1
cracking little bike there fella
|
|
|
Post by LC'Adam on Feb 27, 2011 23:12:37 GMT 1
Should go well mate get a video up ;D
|
|
perence23
Drag-strip hero
RD350 ypvs
Posts: 202
|
Post by perence23 on Feb 27, 2011 23:33:48 GMT 1
Should go well mate get a video up ;D Hopefully should still running in done about 180 miles. I will do a few videos when its all done.
|
|