|
Post by LC'Adam on Nov 30, 2010 1:31:35 GMT 1
A few revs, all polished/waxed/oiled and greased ready for the cold winter months >>>> <<<< Just fitted a 180 main jet, removed air box snorkle and fitted Hy-tech reeds. Head still not sealing properly and squish is 1.7mm !!! Having my spare head machined down and redressed (due to detonation). Squish will be set to as near to 1.25 as I can get it. Then its off with the barrel to Mr. Mick Abbey Keep ya posted Adam
|
|
|
Post by Norbo on Nov 30, 2010 7:20:28 GMT 1
looks smart mate .
|
|
corf
Drag-strip hero
Posts: 251
|
Post by corf on Nov 30, 2010 7:41:00 GMT 1
very smart
|
|
|
Post by mellow on Nov 30, 2010 17:57:54 GMT 1
looks nice m8 wot no nikon bet ur neighbours love you lol
|
|
|
Post by LC'Adam on Nov 30, 2010 20:17:28 GMT 1
Thanks guys, They do love me mellow Nikkon will go on after I get it tuned. Just finished my spare head in BBQ paint, ready to go on.
|
|
|
Post by LC'Adam on Dec 1, 2010 20:47:13 GMT 1
Cylinder head, Gaz-robbo styley, Sorry, I'm a right bugger for not taking step by step pics. I always rush to get it done Any ways, my spare head looked sorry for its self with a peeling, salt infested paint job going on. Soaked it in thinners over night, then attacked it with my new toy (first go with a dremel). Not the best job but then went over it with two coats of Plasticoat BBQ paint (Gaz' favorite) and it now it looks like this after being baked off in the oven for 20 mins. Not the best but first ever proper go with spray paint and dremel (not factory finish lol) ;D Adam
|
|
|
Post by Norbo on Dec 2, 2010 7:12:06 GMT 1
looks like a good job to me not that you can realy get it to wrong when sprayings heads and barrels .
|
|
cubz
L plate rider.
Posts: 35
|
Post by cubz on Jan 2, 2011 0:31:35 GMT 1
ad where did ya get ya decals made up mate???
|
|
|
Post by LC'Adam on Jan 2, 2011 1:27:40 GMT 1
Norbo got them made up for me, if you ever need anything for ya lc, give him a call mate. Thinking of putting some on your lc? Would love to see some pics mate. Make sure you do a better job of putting your stickers than i did though Looks a bit rough around the edges tbh. But like some others say on this forum, its a ten footer lol. If you get any closer.......... (well, just don't ;D). Adam
|
|