|
Post by rd50084matt on Aug 30, 2010 13:13:31 GMT 1
Hi peeps
need an original mikuni carb cable guide/tube,the bit that fits in top of carb screw on cap the cable goes through?
cheers
Matt
|
|
|
Post by mellow on Aug 30, 2010 17:59:24 GMT 1
|
|
|
Post by rd50084matt on Aug 30, 2010 20:39:48 GMT 1
Thanks mate,thats a big help,cheers for posting linky
Matt
|
|
|
Post by looey on Aug 30, 2010 21:32:55 GMT 1
I have a question about these tubes and the cables. When you buy a new cable, wot is included at the carb end ?. Reason I ask is I have 3 10w carbs here not fitted to bikes. 2 are brand new and have the 45 degree tube in the top with the threaded end and the thin locking nut (but no long nut). The other used carb someone has just cut the cable above the tube/nut, so it has the 45 degree tube plus the long nut as well as the thin locking nut. ?. Answers on a postcard please
|
|
|
Post by mellow on Aug 30, 2010 21:52:08 GMT 1
ive got a brand new cable..........il go look ;D
|
|
|
Post by mellow on Aug 30, 2010 21:53:31 GMT 1
the long adjuster nut is on cable looey
|
|
|
Post by looey on Aug 31, 2010 8:00:02 GMT 1
Wicked, means all the carbs I've got are complete ;D Cheers
|
|
|
Post by mellow on Aug 31, 2010 16:54:44 GMT 1
ur welcome..........we aim to please ;D
|
|
|
Post by rd50084matt on Sept 22, 2010 0:03:03 GMT 1
all sorted now Allens were very good,and only a few quid,btw Yamaha only sell that small part as part of the carb complete,but they wil lsell you the rubber bung in the top-robbin tarts!.lol
|
|