|
|
Post by Norbo on Nov 8, 2007 17:30:24 GMT 1
Theys are the 3 designs of back brake plate i am making right now. I am going to have all 3 made up but what do you think is the best looking. I like the snake on as i have never seen them made like this before. but i would like your opinions so i can decide what numbers to make in each one.  |
|
|
|
Post by Dirtbag on Nov 8, 2007 18:58:11 GMT 1
I like the top and the bottom one.........that middle one looks like it might be a bit weak mate  |
|
|
|
Post by Norbo on Nov 8, 2007 19:37:23 GMT 1
I could have that one made 2mm thiner and put more of an angle on it . What do you think , I value your opinion mate .
|
|
|
|
Post by stevebozzy on Nov 8, 2007 20:15:13 GMT 1
if i needed one of them
i would prefer the top one
steve
|
|
|
|
Post by Shytalk on Nov 8, 2007 21:19:46 GMT 1
Just a thought but couldn't you have "YAMAHA" engraved  |
|
|
|
Post by vin on Nov 8, 2007 21:31:39 GMT 1
Top one looks best IMO  |
|
|
|
Post by scott on Nov 8, 2007 21:49:51 GMT 1
i'm with the top one aswell |
|
|
|
Post by K.B on Nov 8, 2007 22:06:08 GMT 1
The top one looks good !
I will buy one when you have some !
|
|
|
|
Post by sheep911uk on Nov 8, 2007 23:26:21 GMT 1
Top one for me too
|
|
|
|
Post by petehodges on Nov 9, 2007 0:01:23 GMT 1
top ones a winner with me mate as well |
|
russktm
Drag-strip hero
Finally on the road!!
Posts: 281
|
Post by russktm on Nov 9, 2007 0:46:49 GMT 1
Top one, for me too.
|
|
|
|
Post by Dirtbag on Nov 9, 2007 4:19:24 GMT 1
Just a thought but couldn't you have "YAMAHA" engraved Now you're talking YAMAHA , RD LC , etc would be top sellers mate then whack em' on Ebay |
|
|
|
Post by alibongo on Nov 9, 2007 9:58:24 GMT 1
Top, Middle or Bottom?
Bottom! ;D
|
|
|
|
Post by Norbo on Nov 9, 2007 10:52:57 GMT 1
I dont think i could put Yamaha rdlc in as its a lot of letters and would double the price and weeken the bar as lettering is close to gether .
However i am going to see if may be just RD - LC could be put at just 1 end fith the rest have no slots that way the price of that one may only be a could of quid more
|
|
|
|
Post by Norbo on Nov 9, 2007 11:06:52 GMT 1
Just thourght how would you get the midle bit in the R to stay in  ?. If cut out it would be on the floor |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 9, 2007 21:23:38 GMT 1
I'd give an opinion if i knew what they are/were? |
|
|
|
Post by Norbo on Nov 10, 2007 11:51:57 GMT 1
Im going to make the snake ones a little thiner and put more swigle on them . Well thats the new plans i posted to them anyway . I will just have to wate now for a phone call and some new samples/
|
|
|
|
Post by tonkatoy on Nov 11, 2007 15:49:58 GMT 1
i like the middle one (just to be different)  |
|
|
|
Post by Norbo on Nov 12, 2007 9:48:49 GMT 1
i like the middle one (just to be different) Bloody hell will you lot just make your mined up I dont think i can put letters cut in to them becourse they would have to be quight small so they dont weeken the bar by going to cloce to the outer sides so you wont be able to see them. I'll just redo the bottom one a little to but more wigel on it. |
|
nzgaz
L plate rider.
Posts: 19
|
Post by nzgaz on Nov 15, 2007 9:26:44 GMT 1
Hi Norbo, what will they cost and when will they be available?
PS. I prever the top one. ;D
|
|
|
|
Post by Norbo on Nov 15, 2007 11:32:09 GMT 1
They will be £20 as they come or £25 polished plus post
|
|
nzgaz
L plate rider.
Posts: 19
|
Post by nzgaz on Jan 15, 2008 8:55:46 GMT 1
Hi Norbo, are these available to buy now? If they are I would like to include one in an order I want to put together. Cheers Gaz
|
|
|
|
Post by Norbo on Jan 15, 2008 11:38:38 GMT 1
They are made but im not picking them up untill the 21st as its a long way to fetch them and i casn do 2 things at the same time on the 21st. But thats not long now anyway. Can't wate to get them , i love geting new itoms.
|
|
doy
Thrash Merchant
Posts: 427
|
Post by doy on Jan 20, 2008 15:33:11 GMT 1
Hhmm cant see the picture.
|
|
|
|
Post by Norbo on Jan 21, 2008 18:53:36 GMT 1
sorry mate , Its an old post i rempve old pics from my photo bucket account every now and again. But as it happens i have just picked up the new ones to day so i woill be polishing a few up if the rain stops for a hour or so and posting pics again on here before i add them to the main site shop .
|
|
nzgaz
L plate rider.
Posts: 19
|
Post by nzgaz on Feb 1, 2008 10:27:44 GMT 1
Hows the polishing going? Must be really shiny by now ;D
|
|
|
|
Post by Norbo on Feb 2, 2008 17:10:41 GMT 1
I polished a couple up and was going to put a pic up then some one came over and had them both his his bikes . then i did another and some one came over while i was finishingit and had that one.
I will try to get a few done after the weekend . .
I can do a pic of the types i have but they wont look there best as they wont be polished .
|
|
|
|
Post by Norbo on Feb 3, 2008 12:19:16 GMT 1
Put a pic up in the for sale part now mate .
|
|
nzgaz
L plate rider.
Posts: 19
|
Post by nzgaz on Feb 4, 2008 9:10:17 GMT 1
Hi Norbo, had a good look round your site and can't find them |
|
|
|
Post by Norbo on Feb 4, 2008 13:01:53 GMT 1
They are in the for sale part of this forum under alloy lc brake arms .
|
|
