|
|
Post by justinglos on May 25, 2010 20:48:48 GMT 1
 now this really dumb how do i get the trip dial off the clocks? pulled, pushed looked for a clip still cant get it off  will thowing at wall soon 
|
|
|
|
Post by mellow on May 25, 2010 22:18:30 GMT 1
tiny phillips screw in the end of the knob or somewhere round the shaft |
|
|
|
Post by justinglos on May 26, 2010 20:26:33 GMT 1
will have a look many thanks
|
|
|
|
Post by carlos on May 26, 2010 20:41:43 GMT 1
The screw is in the hole in the end of the shaft
|
|
|
|
Post by justinglos on May 26, 2010 21:31:32 GMT 1
jesus how supose to get a screwdriver down that hole?
tryed the watchmakers drivers but wont turn what a bad idea
|
|
|
|
Post by carlos on May 26, 2010 22:00:46 GMT 1
yup, you need a bloody small screw driver!
|
|
|
|
Post by carlos on May 26, 2010 22:09:21 GMT 1
 The screw goes in that little hole |
|
|
|
Post by justinglos on May 26, 2010 22:14:51 GMT 1
cheers got the screw out of the set i need
the screw in kph set just to tight might try drill it out
|
|
now this really dumb how do i get the trip dial off the clocks?
