|
|
Post by simonlc on Mar 2, 2024 20:14:08 GMT 1
Anyboy know where i can get some Alloy exhaust end cans that dont look like cheap chinese tatt? I have carbon cans at mo but not a fan of carbon .
|
|
|
|
Post by midlifecrisisrd on Mar 2, 2024 20:22:16 GMT 1
Dave swarbrick will make you a set
I've had a few sets off him
Steve
|
|
|
|
Post by simonlc on Mar 2, 2024 20:51:34 GMT 1
So if I give him all the dimensions he can bespoke make them?
|
|
|
|
Post by 4l04ever on Mar 2, 2024 22:25:09 GMT 1
Norbo has a few pre-made ones in his shop.
What exhausts are they for?
|
|
|
|
Post by simonlc on Mar 2, 2024 22:45:12 GMT 1
TSA .
|
|
|
|
Post by 4l04ever on Mar 2, 2024 23:26:51 GMT 1
I might be interested in your carbon cans. Kenny may have capacity to make some aluminium cans for you. tsa |
|
|
|
Post by simonlc on Mar 3, 2024 0:14:33 GMT 1
Yeh Ive messaged him
|
|
|
|
Post by JonW on Mar 3, 2024 0:56:40 GMT 1
I might be interested in your carbon cans. Kenny may have capacity to make some aluminium cans for you. tsaI thought he only sold pre made ones? If he makes em, does he do custom? |
|
|
|
Post by midlifecrisisrd on Mar 3, 2024 9:42:17 GMT 1
Kenny's are really nice, I've had a stubby pair from him
The ones Dave Swarbrick made for me were for an rz 51l exhaust so 60mm diameter
I sent him a standard one and he copied it
I got a second stubby set for another pair
Good old school ones with the big circlip on the end for repacking, no rivets to come loose
Steve
|
|
|
|
Post by simonlc on Mar 3, 2024 10:31:13 GMT 1
Yeh that’s what I am looking for.
|
|
|
|
Post by midlifecrisisrd on Mar 3, 2024 11:20:23 GMT 1
These are some of the ones he made me Steve   |
|
|
|
Post by JonW on Mar 3, 2024 13:03:36 GMT 1
Oi! I can see a rivet!
|
|
|
|
Post by shaunthe2nd on Mar 3, 2024 17:33:15 GMT 1
|
|
|
|
Post by simonlc on Mar 3, 2024 19:29:50 GMT 1
That is exactly what I am looking for 👍
|
|
|
|
Post by midlifecrisisrd on Mar 3, 2024 19:37:07 GMT 1
🤣🤣🤣 But it's not holding the baffle in 🤪 Steve |
|
|
|
Post by midlifecrisisrd on Mar 3, 2024 19:38:23 GMT 1
That is exactly what I am looking for 👍 Info@swarbrick-racing.co.uk |
|
|
|
Post by headcoats on Mar 3, 2024 20:02:54 GMT 1
Those curved end cap pipes look so much better than the straight ends and no rivets and just a big circlip make perfect sense 👌
|
|
|
|
Post by JonW on Mar 3, 2024 23:19:31 GMT 1
Nah, if i was counting I'd have said how many I could see as there is >1  |
|
|
|
Post by steve63 on Mar 4, 2024 18:47:11 GMT 1
What is the rivet for?
Mine use M4 dome head cap screws to hold the baffle in. A bit of thread lock stops them unscrewing but I can still take them apart for re-packing. They look like rivets until you get very close.
|
|
|
|
Post by midlifecrisisrd on Mar 4, 2024 20:28:02 GMT 1
No idea, never opened one
Steve
|
|
