|
|
Post by memorylane on Aug 26, 2023 13:58:40 GMT 1
£499 inc del, Ordered Wednesday arrived Thursday, spoke to v helpful Harry at DK HQ, yes centre stand can stay on and no pro am belly pan can’t, rubber grommet supplied for kickstand spring support, extra gaskets
Finish is nice, some welds could have been better, hate the red baffles but that’s gonna be a easy fix.
I think they sound and look awesome, suddenly it was 1983 again and I was 17 outside the chippy with me mates
|
|
|
|
Post by nomoreheros on Aug 26, 2023 15:38:22 GMT 1
£499 inc del, Ordered Wednesday arrived Thursday, spoke to v helpful Harry at DK HQ, yes centre stand can stay on and no pro am belly pan can’t, rubber grommet supplied for kickstand spring support, extra gaskets Finish is nice, some welds could have been better, hate the red baffles but that’s gonna be a easy fix. Look great mate...did you buy em direct or off eBay? I think they sound and look awesome, suddenly it was 1983 again and I was 17 outside the chippy with me mates |
|
|
|
Post by nomoreheros on Aug 26, 2023 15:40:38 GMT 1
Look great mate... did you buy em direct or off eBay?
|
|
|
|
Post by memorylane on Aug 26, 2023 15:57:47 GMT 1
Look great mate... did you buy em direct or off eBay? Via eBay mate |
|
red998
Drag-strip hero
Posts: 211
|
Post by red998 on Aug 26, 2023 15:57:53 GMT 1
Definitely sounds better than my Jim Lomas pipes, a lot deeper sound and less tinny. My pipes do work very well though and I can't see any difference beyond stock, and the response is pretty good when opening the throttle. What are these like on the open road as you open them up? mine are quite tractable and seem quite close to what I wanted, They start to sing at about 6,000 rpm and above, but I haven't ridden my LC for a few years until lately, I might be out of touch with what my totally stock 250LC was like when I last rode it.
If I purchased another pair of exhausts, currently, these seem to be my first choice.
|
|
|
|
Post by gav250lc on Aug 26, 2023 16:39:30 GMT 1
Nice did post earlier this week about these pipes and what everyone thought. was going too buy allspeeds but can’t see any difference that’s worth the extra £300 nice too see them on your bike and you are happy with them so goin* too order mine now cheers gav
|
|
|
|
Post by nomoreheros on Aug 27, 2023 10:16:56 GMT 1
Anyone fitted these pipes to an LC2?...says not suitable to use with bellypan....im guessing they touch the bellypan just like allspeeds do
|
|
fabiostar
Thrash Merchant
the older i get the faster i was.
Posts: 406
|
Post by fabiostar on Aug 27, 2023 15:23:53 GMT 1
Nice did post earlier this week about these pipes and what everyone thought. was going too buy allspeeds but can’t see any difference that’s worth the extra £300 nice too see them on your bike and you are happy with them so goin* too order mine now cheers gav they look proper nice, and £300 extra for allspeeds!!!!!! they are taking the piss for pipes that should be a lot cheaper, its not like they are covering development costs! that must have been done 40 years ago.. |
|
|
|
Post by gav250lc on Aug 27, 2023 16:39:33 GMT 1
Just couldn’t help myself getting all excited so had too buy it now delkelvic pipes on way even better the missus gave me the thumbs up can’t get better than that
|
|
|
|
Post by geoffers997 on Aug 29, 2023 15:54:23 GMT 1
A thumb up your new pipe. Gosh. 😵💫
I’ll get me coat.
|
|
matss
L plate rider.
RD250lc 1981
Posts: 28
|
Post by matss on Sept 6, 2023 13:51:52 GMT 1
flic.kr/ps/42DrMUPretty happy with mine on a bored out 250, no need for rejetting either.
|
|
|
|
Post by liffy16 on Sept 7, 2023 10:45:21 GMT 1
Went with mutts nuts mid range pipes instead as these were out of stock at the time! Verdict good n loud 👍
|
|
|
|
Post by vectisitch on Sept 7, 2023 12:29:29 GMT 1
A mate has them on his lc2 with bellypan fitted. I've got mutts allrounders on or I'd buy a set of these. I'd have to spray the ends black though
|
|
|
|
Post by swampy61 on Nov 2, 2023 8:36:26 GMT 1
Has anyone used these on an F/N2 350 ? Do they keep the usable power below the redline ?
|
|
|
|
Post by muttsnuts on Nov 2, 2023 23:06:05 GMT 1
dyno tested some last week, didn't make anymore power than a stock bike, my conclusion was they where noise makers and that was about it
|
|
|
|
Post by lcmarky on Nov 3, 2023 11:47:09 GMT 1
dyno tested some last week, didn't make anymore power than a stock bike, my conclusion was they where noise makers and that was about it Is that not the same for Allspeeds? |
|
trv2t
L plate rider.
Posts: 18
|
Post by trv2t on Nov 4, 2023 20:21:15 GMT 1
But they look and sound great!
|
|
|
|
Post by gav250lc on Nov 5, 2023 20:03:08 GMT 1
Sounds like my wife good too look at and a bit noisy but great fun 😂
|
|
|
|
Post by ashtons99 on Nov 8, 2023 20:46:42 GMT 1
Has anyone fitted these and managed to keep bellypan
|
|
rclc
L plate rider.
Posts: 40
|
Post by rclc on Nov 14, 2023 19:22:19 GMT 1
There is something nice about a revving a 2 stroke. Neighbours might not like it on a Sunday morning.
|
|
|
|
Post by gav250lc on Nov 16, 2023 19:33:31 GMT 1
There is something nice about a revving a 2 stroke. Neighbours might not like it on a Sunday morning. Funny you should say that went over the local aerodrome for a ride out and a cuppa airplanes taking of no problem giving the lc a quick clear out with the delkevics big problem 😂 lol guy came marching over saying he couldn’t here himself think and was teaching a class whoops 😬 |
|
