|
EB Seller
Aug 13, 2023 16:42:05 GMT 1
via mobile
Post by chrisg on Aug 13, 2023 16:42:05 GMT 1
Hi, does anyone know anything about koll123 seller on eb, based in ipswitch. Always has a bike of some sort for sale? Ta
|
|
|
Post by veg on Aug 13, 2023 17:01:43 GMT 1
Do a search on the forum and make your own mind up.
|
|
|
EB Seller
Aug 13, 2023 17:40:12 GMT 1
via mobile
Post by chrisg on Aug 13, 2023 17:40:12 GMT 1
Do a search on the forum and make your own mind up. Wow, thanks for the heads up. 👍
|
|
|
EB Seller
Aug 13, 2023 17:43:52 GMT 1
via mobile
Post by stevesmith on Aug 13, 2023 17:43:52 GMT 1
He's still on the forum....
|
|
|
Post by 4l04ever on Aug 14, 2023 1:46:16 GMT 1
|
|
|
Post by donkeychomp on Aug 17, 2023 21:48:13 GMT 1
|
|
red998
Drag-strip hero
Posts: 211
|
Post by red998 on Aug 18, 2023 13:55:55 GMT 1
This may sound naive? is it too much or too little? I thought\assumed that changing from a stock 250LC setup to a 350LC setup involved a bit more mechanical work, such as changing the oil pump 9possibly etc.), it doesn't seem to have one in the photos, and possibly other parts. Can someone indicate what you would exactly is needed to undertake an upgrade from an 250LC setup to a stock conventional 350LC setup as I have no experience or knowledge of 350LC's. Maybe I could think about this for the future? is it viable or not worth the effort? due to cost, lack of parts?
|
|
|
Post by JonW on Aug 18, 2023 14:04:09 GMT 1
Have a search on here, plemnty have done it and its been discussed quite a bit.
|
|
|
Post by veg on Aug 18, 2023 14:14:05 GMT 1
It’s fairly straightforward as Jon says it’s one of the most discussed topics so loads of posts, you also have to bear in mind are you talking the mechanical side or the full whole conversion.
|
|
red998
Drag-strip hero
Posts: 211
|
Post by red998 on Aug 18, 2023 14:38:25 GMT 1
Both, I am mechanically competent but have never thought about an 350LC conversion as my background has always been with 250LC's which back on to my racing "career" racing TZ250's of various types over a few years.
I'll have a go a looking up the previous posts, although I find the search engine doesn't always get what I want, possibly through searching not very accurately.
|
|
|
EB Seller
Aug 18, 2023 16:48:58 GMT 1
via mobile
Post by veg on Aug 18, 2023 16:48:58 GMT 1
Ok, the differences are basically barrels, head, pistons etc then oil pump, slight carb differences etc. chassis is twin disc, different master cylinder but you are better off using the 250 master cylinder, twin horns rather than single, std pipes are slightly different but most people use spannies. Rear Cush drive is different on 250 to 350. Tbh it’s been remarked recently that are probably fewer std 250s today and more 350s and actually the 250 is still a great bike. If you are looking for more get up and go I’d be looking at get a fahron 370 conversion as 250 barrels and head are a reasonable price stil, whereas you’re looking at £1000 for barrels and head for a 350 today. Get a 370 get arrow to do your pump get a decent ignition system and decent pipes and I doubt you’ll want for much more with a std chassis. The other alternative get a Ypvs motor and the limit is your wallet it all depends on what you want and what you can afford.
|
|
|
Post by donkeychomp on Aug 18, 2023 21:48:06 GMT 1
Something odd's happened as the link now shows a blue bike and the original ad was a white one. That's a worry. And the price bothers me as it's so random, like £3658 or something like that.
Alex
ps personally I'd buy sod all from him
|
|
|
EB Seller
Aug 18, 2023 22:07:45 GMT 1
via mobile
Post by midlifecrisisrd on Aug 18, 2023 22:07:45 GMT 1
Something odd's happened as the link now shows a blue bike and the original ad was a white one. That's a worry. And the price bothers me as it's so random, like £3658 or something like that. Alex ps personally I'd buy sod all from him It's just economically proficient when you have a few bikes to sell to list as a 30 day classified and as each one sells you edit the listing for the next bike Steve
|
|
|
Post by donkeychomp on Aug 18, 2023 22:31:15 GMT 1
Didn't know that Steve, cheers. Still wouldn't buy anything.
Alex
|
|
|
EB Seller
Aug 28, 2023 11:20:20 GMT 1
via mobile
Post by chrisg on Aug 28, 2023 11:20:20 GMT 1
His name is now collin ellis? Has he reinvented himself.
|
|
|
Post by stevesmith on Aug 28, 2023 11:36:41 GMT 1
His name is now collin ellis? Has he reinvented himself. Monkfish1966 I'm led to believe as well....
|
|
|
EB Seller
Aug 29, 2023 8:36:31 GMT 1
via mobile
Post by stevesmith on Aug 29, 2023 8:36:31 GMT 1
His name is now collin ellis? Has he reinvented himself. Monkfish1966 I'm led to believe as well.... Nope it's monkfish1066....🙄
|
|