|
Post by diamonddave on May 7, 2023 16:00:42 GMT 1
Hi all. New member here so hope I'm posting in the right place. I'm looking for some parts for an RD250C that are proving difficult to find. I need a set of seat hinges and hold down hook/spring, I have the seat but no way of fitting it to the bike ! I'm also in need of a gear change lever with or without rubber, any condition. Any help with this, or a point in the right direction, would be very much appreciated. Thanks. Dave.
|
|
|
Post by dusty350 on May 7, 2023 16:44:51 GMT 1
Hi Dave Welcome to the forum👍 We have a classified section with Sale and Wanted sections that will open up to you once you achieve 10 posts. Tell us about yourself, your bike etc, and 10 is easily achieved. We are a friendly bunch and the site thrives when members get involved , so don't be shy ! Once you get to 10, post in the Wanted section that will appear at the bottom of the page index
Regards
Dusty🙂
|
|
|
Post by davecroucher57v on May 7, 2023 20:37:43 GMT 1
david james aircooled forum.
|
|
ike
L plate rider.
Posts: 12
|
Post by ike on Aug 6, 2023 12:22:35 GMT 1
Hi Dave Welcome to the forum👍 We have a classified section with Sale and Wanted sections that will open up to you once you achieve 10 posts. Tell us about yourself, your bike etc, and 10 is easily achieved. We are a friendly bunch and the site thrives when members get involved , so don't be shy ! Once you get to 10, post in the Wanted section that will appear at the bottom of the page index Regards Dusty🙂
|
|
ike
L plate rider.
Posts: 12
|
Post by ike on Aug 6, 2023 12:23:43 GMT 1
hi dave ihave the same problem and am tring to get to my 10 postc
|
|