|
Post by muttsnuts on Jan 26, 2022 16:19:36 GMT 1
Just sorting a few projects out and thinking of selling some, this one I've no idea on value - any thoughts ?
Got a KR1 rolling chassis (V5 present), converted to take LC/YPVS engine, with VJ22 swinging arm, ohlins full adjustable rear shock with remote reservoir, 310mm PFM discs, ZXR400 brake calipers, ZXR400L front forks with 20mm KTech cartridges, Dymag wheels with Pirelli supercorsa's (As new) tyres, Accosato front M/C cyl, R6 radiator, SF250K tail unit (customisd), KR1s fuel tank with twin taps with Harris filler cap, Honda RSW250 fairings (need a bit of tidying up, rearsets are cheap chinese ones, but work fine, clip-ons and quick action Venhill throttle
Thoughts welcome....................
|
|
|
Post by liffy16 on Jan 26, 2022 21:35:10 GMT 1
Yes tough to value this one ,would make one trick special though ,suppose you could start on what it owes you ??
|
|
|
Post by chrisg on Jan 26, 2022 21:38:10 GMT 1
My best guess would be £1000 but I might be out by miles. It may be worth more with an engine fitted?
|
|
|
Post by liffy16 on Jan 26, 2022 21:45:29 GMT 1
My best guess would be £1000 but I might be out by miles. It may be worth more with an engine fitted? Was thinking a lot more than that maybe 3-4k! then the cost of a ypvs motor !
|
|
|
Post by evochris on Jan 26, 2022 21:55:06 GMT 1
3-4k also, a nice trick special in the making. Got any pictures?
|
|
|
Post by muttsnuts on Jan 26, 2022 21:56:54 GMT 1
thanks guys, yeah hard to know what it owes me, collected parts etc over time and swapped parts for jobs etc, dymags will be £800 I suppose (very light), rear ohlins is £650 to buy now, think the ktechs where £400, but as I say, hard to know, not so much what it cost as what its worth, think I'll build a 385cc motor and fit that and use it as my track bike maybe ? - as you say, worth more as a working/running bike
I'll dig it out and take some piccies, might put it up as a project if I decide to do it
|
|
|
Post by chrisg on Jan 26, 2022 22:05:52 GMT 1
My best guess would be £1000 but I might be out by miles. It may be worth more with an engine fitted? So, miles out Doh. Maybe put it on eb at the higher price, but put a buy it now on the listing.
|
|
|
Post by kirkhd on Jan 26, 2022 22:38:29 GMT 1
My best guess would be £1000 but I might be out by miles. It may be worth more with an engine fitted? At that money i'd of had it
|
|
|
Post by reedpete on Jan 27, 2022 5:49:40 GMT 1
Just sorting a few projects out and thinking of selling some, this one I've no idea on value - any thoughts ? Got a KR1 rolling chassis (V5 present), converted to take LC/YPVS engine, with VJ22 swinging arm, ohlins full adjustable rear shock with remote reservoir, 310mm PFM discs, ZXR400 brake calipers, ZXR400L front forks with 20mm KTech cartridges, Dymag wheels with Pirelli supercorsa's (As new) tyres, Accosato front M/C cyl, R6 radiator, SF250K tail unit (customisd), KR1s fuel tank with twin taps with Harris filler cap, Honda RSW250 fairings (need a bit of tidying up, rearsets are cheap chinese ones, but work fine, clip-ons and quick action Venhill throttle Thoughts welcome.................... I’d calculate what it would make in parts split out as described, discount by 20% if all sold as a project which would go some way to reflect the ease of liquidation, reduction in packing agro etc. Then if no takers like that just sell off in logical order.
|
|
|
Post by muttsnuts on Jan 27, 2022 8:52:32 GMT 1
Just sorting a few projects out and thinking of selling some, this one I've no idea on value - any thoughts ? Got a KR1 rolling chassis (V5 present), converted to take LC/YPVS engine, with VJ22 swinging arm, ohlins full adjustable rear shock with remote reservoir, 310mm PFM discs, ZXR400 brake calipers, ZXR400L front forks with 20mm KTech cartridges, Dymag wheels with Pirelli supercorsa's (As new) tyres, Accosato front M/C cyl, R6 radiator, SF250K tail unit (customisd), KR1s fuel tank with twin taps with Harris filler cap, Honda RSW250 fairings (need a bit of tidying up, rearsets are cheap chinese ones, but work fine, clip-ons and quick action Venhill throttle Thoughts welcome.................... I’d calculate what it would make in parts split out as described, discount by 20% if all sold as a project which would go some way to reflect the ease of liquidation, reduction in packing agro etc. Then if no takers like that just sell off in logical order. yeah, that's what I am beginnig to think, so might just build it as collecting all the parts took a while, as did doing the frame conversion, that wasn't a 5 min task !
|
|
|
Post by liffy16 on Jan 27, 2022 9:47:50 GMT 1
Collecting these parts now would cost a fortune, so get er built up 👍then it would be worth a zillion pounds 😂
|
|
|
Post by muttsnuts on Jan 27, 2022 10:13:46 GMT 1
yeah, thinking it would make a mean hill climb/track tool and I have a spare 443cc engine, so thinking I might fit that into it, think when I weighed it without an engine it came in around 80kgs !
|
|
|
Post by chrisg on Jan 27, 2022 17:24:33 GMT 1
My best guess would be £1000 but I might be out by miles. It may be worth more with an engine fitted? At that money i'd of had it OK, so I live in 1984.
|
|
|
Post by rigga on Jan 28, 2022 8:47:56 GMT 1
At that money i'd of had it OK, so I live in 1984. Not such a bad thing .... I'd go back.
|
|
|
Post by Robbieben on Feb 3, 2022 14:22:58 GMT 1
Hi, Just been having a search through the forum Is this still for sale ? I’m very interested is so Probably better giving Dave a call. Depending how busy he is he may not see the post for a few days.
|
|