|
|
Post by nokturnal on Mar 2, 2020 21:10:54 GMT 1
I don’t want to f anything up. I need to replace the bearing on the drum, but can’t get the star off the drum...
Any tips?
I took off the screw already, which was a b*****d...
|
|
|
|
Post by risolc on Mar 2, 2020 21:46:28 GMT 1
I used a little 2 leg puller to get mine off,fiddly balancing it all together,it’s not real tight on there.
Then there’s the clip to remove
|
|
|
|
Post by dusty350 on Mar 2, 2020 22:09:44 GMT 1
You can gently tap the star with a hammer and wooden drift, working your way around the circumference of the star. They can be a tight fit. It's easy to chip the sharp edge of the central bolt housing, so easy does it  Dusty  |
|
|
|
Post by nokturnal on Mar 3, 2020 11:54:17 GMT 1
Appears mine is already chipped...
|
|
|
|
Post by nokturnal on Mar 3, 2020 11:54:42 GMT 1
Thanks guys
|
|
|
|
Post by nokturnal on Mar 3, 2020 17:02:41 GMT 1
Got er off. Seems the grinding gritty feel I was getting from the bearing may not have been the bearing itself. The drum bearing surface is quite worn.
Change your oil!
|
|
|
|
Post by nokturnal on Mar 3, 2020 17:03:45 GMT 1
|
|
|
|
Post by stusco on Mar 3, 2020 17:24:41 GMT 1
Doesn’t look too clever
|
|
|
|
Post by risolc on Mar 3, 2020 19:33:00 GMT 1
That’s worse than mine,that’s not any help I know😡
|
|
|
|
Post by Tobyjugs on Mar 3, 2020 20:13:23 GMT 1
Seen it a few times now unfortunately.
|
|
