|
Post by wangwang on Jul 21, 2019 10:55:24 GMT 1
Can anyone make me the cable guide on the front LHS of the headstock on an LC frame,so I can have it welded back on, or point me in the direction of what metal wire to use. Cheers wang
|
|
|
Post by oldelsieboy on Jul 21, 2019 11:55:05 GMT 1
Can anyone make me the cable guide on the front LHS of the headstock on an LC frame,so I can have it welded back on, or point me in the direction of what metal wire to use. Cheers wang OEB
|
|
|
Post by midlifecrisisrd on Jul 21, 2019 11:58:37 GMT 1
Lol
That's what I thought
Or a welding rod 😁
Steve
|
|
|
Post by wangwang on Jul 21, 2019 16:48:49 GMT 1
The original does seem quite sturdy though lol.
|
|
|
Post by tell7437 on Jul 21, 2019 21:36:24 GMT 1
I got the measurements off this forum to make one, try the search function. Made mine from a tent peg
|
|
|
Post by jon on Jul 23, 2019 7:15:52 GMT 1
Can anyone make me the cable guide on the front LHS of the headstock on an LC frame,so I can have it welded back on, or point me in the direction of what metal wire to use. Cheers wang OEB Hi OEB, as stated coat hangers are smaller gauge, quite apart from the fact that I haven’t seen a wire one for years. +1 on the tent peg. Heat it to cherry red before bending. Jon
|
|