|
Post by donkeychomp on Feb 2, 2019 0:57:30 GMT 1
Clock binnacle. Not sure if YPVS or TZR... Cheers lads Alex
|
|
|
Post by JonW on Feb 2, 2019 2:13:07 GMT 1
looks like it would fit either.
|
|
|
Post by philmill on Feb 2, 2019 8:07:40 GMT 1
Looking at the two small screw holes either side of the "idiot" lights I'd say FZR, I bought a set for my hybrid, it has a binnacle over the lights unlike the TZR, but the clocks are the same size I believe.
HTH Phil
|
|
|
Post by Yogi on Feb 2, 2019 9:02:06 GMT 1
Here's a pic of the fzr clocks showing the binnacle As said it fits Tzr/Fzr/Rd and more Matt
|
|
|
Post by jon on Feb 2, 2019 9:17:51 GMT 1
I could of been fed a yarn? But I bought some clocks that were said to be Japanese market RZ.
They are not like the white writing FZR clocks above, but orange like my F2. Speedo being KPH of course.
These have the binnacle too.
Jon
|
|
|
Post by Yogi on Feb 2, 2019 10:12:34 GMT 1
I could of been fed a yarn? But I bought some clocks that were said to be Japanese market RZ. They are not like the white writing FZR clocks above, but orange like my F2. Speedo being KPH of course. These have the binnacle too. Jon The Rz250r does have the same type on but similar to f2 rdlccrazy.proboards.com/thread/44942/bringing-track-lc-back-lifeMatt
|
|
|
Post by donkeychomp on Feb 2, 2019 11:44:41 GMT 1
Thanks chaps. Mine are the same as Yogi's pic.
Alex
|
|
|
Post by JonW on Feb 2, 2019 13:20:38 GMT 1
I could of been fed a yarn? But I bought some clocks that were said to be Japanese market RZ. They are not like the white writing FZR clocks above, but orange like my F2. Speedo being KPH of course. These have the binnacle too. Jon yes the one with the 17" 3 spoke wheels (ala FZR250 etc).
|
|
|
Post by wwwRD350LCnet on Feb 2, 2019 21:19:32 GMT 1
It's similar to N2/ European TZR but there is 2 small holes to hold the plastic cap like on my RZ250R 3HM1: Xavier
|
|
|
Post by donkeychomp on Feb 2, 2019 23:25:34 GMT 1
Yep. That's mine. Minus the rev counter and temp gauge!
Alex
|
|
|
Post by midlifecrisisrd on Feb 2, 2019 23:28:55 GMT 1
Same one on my 3hm1 rz250r and also on early fzr's
Not surprising as 3hm1 has fzr250 fork uppers, yokes, bars and front muddy
Steve
|
|