|
|
Post by bertiemollie on Apr 6, 2009 21:49:08 GMT 1
Finally got round to putting it together  . Completely stripped, vapour blasted cases, all new brgs, rebore, powder coated clutch cover, barrel & head. I have NOS plastic covers to go on and a new 10w carb too ;D. Stating to get a bit of motivation now the weather is warming up. Got to get the wheels and tyres sorted next.   |
|
|
|
Post by bertiemollie on Apr 7, 2009 1:28:36 GMT 1
ANDREW, you know the geen x heads make sence mate....  really nice!! i see the original head nuts etc etc and elbow screws...just seems a shame to fit allens on side casing when you have made it look "out of factory!" Hi Gary, Thanks for the comments. If you have seen my 350 you'll realise I don't care much for olive pass ;D. It will be a very similar theme to my 4L0 i.e standard with a little bit of bling. That's the way I like my LC's, just like they were in the 80's  . Any of the "mods" I make are reversible so if I ever changed my mind and decided to put an anorak on I can easily alter it LOL. |
|
|
|
Post by wheelieman on Apr 7, 2009 21:04:30 GMT 1
very nice
|
|
|
|
Post by tomitch on Apr 7, 2009 22:59:40 GMT 1
wish mine looked like that  how much was the vapour blasting + powder coating and who by ?? i live in anglesey and there aint any companys that do anything like this (everything is bojed round here) for probly nearing 75-100 miles |
|
|
|
Post by bertiemollie on Apr 7, 2009 23:22:29 GMT 1
wish mine looked like that how much was the vapour blasting + powder coating and who by ?? i live in anglesey and there aint any companys that do anything like this (everything is bojed round here) for probly nearing 75-100 miles Hi, PJ engineering blasted my cases. You have to take all of the bearings out first. I got them to press my new ones back in as well. The powder coating was done by Redditch shotblast and powder coat. Again you have to completely strip the components and e ready for a bit of hand cleaning when they come back. Both these guys are in the West Midlands. Cheers Andrew |
|
|
|
Post by twostroker on Apr 8, 2009 19:21:12 GMT 1
i ust admit it looks lovley,i wish i had my cases vapour blasted,when mines due for a rebuild il think il give it a go
|
|
|
|
Post by twostroker on Apr 12, 2009 19:57:40 GMT 1
spot on,looks lovley,looking forward to seeing the bike finished
|
|
|
|
Post by tomitch on Apr 13, 2009 22:47:23 GMT 1
wish mine looked like that how much was the vapour blasting + powder coating and who by ?? i live in anglesey and there aint any companys that do anything like this (everything is bojed round here) for probly nearing 75-100 miles Hi, PJ engineering blasted my cases. You have to take all of the bearings out first. I got them to press my new ones back in as well. The powder coating was done by Redditch shotblast and powder coat. Again you have to completely strip the components and e ready for a bit of hand cleaning when they come back. Both these guys are in the West Midlands. Cheers Andrew barstuard i just sent my bloody bigbore to pj for a rebore + skim, could have posted them away with that |
|
|
|
Post by tomitch on Apr 13, 2009 22:51:02 GMT 1
whats the extra wire for with the 2pin plug on it mine just has a big block with 9pins
|
|
|
|
Post by carlos on Apr 14, 2009 18:02:41 GMT 1
Neutral Switch from memory, I'm sure mine has both
|
|
|
|
Post by Norbo on Apr 14, 2009 21:27:57 GMT 1
Very nice mate . cant wate to see it fitted to the bike .
|
|
. Completely stripped, vapour blasted cases, all new brgs, rebore, powder coated clutch cover, barrel & head.
.
how much was the vapour blasting + powder coating and who by ?? i live in anglesey and there aint any companys that do anything like this (everything is bojed round here) for probly nearing 75-100 miles
