|
Post by tipfinchy on Oct 18, 2018 13:03:14 GMT 1
|
|
|
black
Oct 18, 2018 13:07:39 GMT 1
Post by tipfinchy on Oct 18, 2018 13:07:39 GMT 1
I did try to put a pic of the other side
|
|
|
black
Oct 18, 2018 14:16:12 GMT 1
Post by mouse on Oct 18, 2018 14:16:12 GMT 1
I like that very much!
Is that the bike 'Dusty' sold to 'Littlebloke' on here? If so, what is it like to ride?
Mouse
|
|
Deleted
Deleted Member
Posts: 0
|
black
Oct 18, 2018 14:38:44 GMT 1
Post by Deleted on Oct 18, 2018 14:38:44 GMT 1
Looks like Darth Vadar with wheels. Very nice
|
|
|
black
Oct 18, 2018 15:01:13 GMT 1
Post by tipfinchy on Oct 18, 2018 15:01:13 GMT 1
I like that very much! Is that the bike 'Dusty' sold to 'Littlebloke' on here? If so, what is it like to ride? Mouse hi mouse yes it is , I am planning on a run out tomorrow so I will know more then , but before it went up to Dave it was as flat as a witches tit and didn't really pull until it got to 10000rpm and it wouldn't idle either it was that bad I did 7 miles on it in about 10 weeks , but it idles lovely and starts first kick now and looking forward to having a run mart
|
|
|
Post by tipfinchy on Oct 18, 2018 15:08:13 GMT 1
Looks like Darth Vadar with wheels. Very nice ha ha I never thought of it like that it will get painted eventually , but the bank balance has taken a bit of a hit with buying it and a few bits and pieces so far and I still want to change a few more bits yet so paint will be last of all mart
|
|
|
black
Oct 18, 2018 15:34:14 GMT 1
Post by dusty350 on Oct 18, 2018 15:34:14 GMT 1
Hi It looks great with those pipes I'm not a fan of carbon personally, and feel that bike needs colour to really show it off. Glad it's up and running well now. I only ever had it ticking over on my driveway, and never rode it. Mike, the fella that built it never rode it either so Dud was the first. I'm sure Mutts will have realised the potential of that engine ! Enjoy Dusty
|
|
|
black
Oct 18, 2018 18:03:09 GMT 1
Post by bare on Oct 18, 2018 18:03:09 GMT 1
That's actually V attractive in Monochrome and especially so devoid of the Yama Advert decals. IMO though (yeah I know) the wheels are too small / out of place. Bit too much like skate board wheels in those large open holes
|
|
|
black
Oct 18, 2018 22:12:47 GMT 1
Post by drc on Oct 18, 2018 22:12:47 GMT 1
That's Beautiful. Almost has be second guessing white as a colour choice
|
|
|
black
Oct 19, 2018 8:30:26 GMT 1
Post by mouse on Oct 19, 2018 8:30:26 GMT 1
I like that very much! Is that the bike 'Dusty' sold to 'Littlebloke' on here? If so, what is it like to ride? Mouse hi mouse yes it is , I am planning on a run out tomorrow so I will know more then , but before it went up to Dave it was as flat as a witches tit and didn't really pull until it got to 10000rpm and it wouldn't idle either it was that bad I did 7 miles on it in about 10 weeks , but it idles lovely and starts first kick now and looking forward to having a run mart Interesting! Well i am sure Dave has sorted it for you, he knows his stuff. I had a 'tuned' 4LO that did nothing until 8000rpm then took off, but totally useless on the road! Mouse
|
|
Deleted
Deleted Member
Posts: 0
|
black
Oct 19, 2018 9:29:06 GMT 1
Post by Deleted on Oct 19, 2018 9:29:06 GMT 1
I like it too. once your sitting on it the big gaps will be a bit smaller id think. Bit like those beautiful vapour blasted cases that you can hardly see once its all put together..
|
|
|
black
Oct 19, 2018 12:37:38 GMT 1
Post by tipfinchy on Oct 19, 2018 12:37:38 GMT 1
Hi It looks great with those pipes I'm not a fan of carbon personally, and feel that bike needs colour to really show it off. Glad it's up and running well now. I only ever had it ticking over on my driveway, and never rode it. Mike, the fella that built it never rode it either so Dud was the first. I'm sure Mutts will have realised the potential of that engine ! Enjoy Dusty thanks Dusty Dave soon sussed it was some bad earths causing the idle problems , and he has got it running real nice too and sounds amazing
|
|
|
black
Oct 19, 2018 12:50:24 GMT 1
Post by tipfinchy on Oct 19, 2018 12:50:24 GMT 1
hi mouse yes it is , I am planning on a run out tomorrow so I will know more then , but before it went up to Dave it was as flat as a witches tit and didn't really pull until it got to 10000rpm and it wouldn't idle either it was that bad I did 7 miles on it in about 10 weeks , but it idles lovely and starts first kick now and looking forward to having a run mart Interesting! Well i am sure Dave has sorted it for you, he knows his stuff. I had a 'tuned' 4LO that did nothing until 8000rpm then took off, but totally useless on the road! Mouse hi Mouse he sure has , just been out for a ride and the sound on full chat is something to hear , I did try to load up the Dyno graph but for some reason flickr just wants to post the same pic all the time (you might have guessed!) but its 72 at the rear wheel @10200 RPM Mart
|
|
|
black
Oct 19, 2018 12:57:48 GMT 1
Post by tipfinchy on Oct 19, 2018 12:57:48 GMT 1
That's Beautiful. Almost has be second guessing white as a colour choice cheers drc the one I had 30 odd years ago was white with red but for some reason I always fancied the white and blue colour scheme I have a few ideas about what I will go for but unfortunately it will be a while yet before im there ££££ mart
|
|
Deleted
Deleted Member
Posts: 0
|
black
Oct 19, 2018 13:12:13 GMT 1
Post by Deleted on Oct 19, 2018 13:12:13 GMT 1
Mart I guess the addition of something subtle against the black would set the bike off even more in appearance. Look forward to the finished article
|
|
|
black
Oct 19, 2018 14:03:04 GMT 1
Post by drc on Oct 19, 2018 14:03:04 GMT 1
That's Beautiful. Almost has be second guessing white as a colour choice cheers drc the one I had 30 odd years ago was white with red but for some reason I always fancied the white and blue colour scheme I have a few ideas about what I will go for but unfortunately it will be a while yet before im there ££££ mart What wheels and rearsets do you have? I've just started a build and am in two minds to keep the standard footrests or get a set of rearsets. Those are lovely looking
|
|
|
black
Oct 19, 2018 17:52:04 GMT 1
Post by tipfinchy on Oct 19, 2018 17:52:04 GMT 1
cheers drc the one I had 30 odd years ago was white with red but for some reason I always fancied the white and blue colour scheme I have a few ideas about what I will go for but unfortunately it will be a while yet before im there ££££ mart What wheels and rearsets do you have? I've just started a build and am in two minds to keep the standard footrests or get a set of rearsets. Those are lovely looking rear sets are from NK racing , quite a few on here use them they are very well made, wheels are Suzuki RGV vj22 I believe mart
|
|
|
black
Oct 19, 2018 17:55:22 GMT 1
Post by tipfinchy on Oct 19, 2018 17:55:22 GMT 1
I like it too. once your sitting on it the big gaps will be a bit smaller id think. Bit like those beautiful vapour blasted cases that you can hardly see once its all put together.. I think your right ken , and the angle of the pic makes it look worse
|
|
|
black
Oct 19, 2018 18:08:55 GMT 1
Post by tipfinchy on Oct 19, 2018 18:08:55 GMT 1
Mart I guess the addition of something subtle against the black would set the bike off even more in appearance. Look forward to the finished article cheers penno it will probably end up with a typically LC paint job but I have thought about something like you suggest mart
|
|
|
black
Oct 19, 2018 20:39:53 GMT 1
Post by dusty350 on Oct 19, 2018 20:39:53 GMT 1
Yea Rgv VJ22 front end and wheels and Metmachex arm. I thought Dud had added some decals to it ? I thought I'd seen some pics with red decals fitted ?? Dusty
|
|
|
black
Oct 19, 2018 20:49:38 GMT 1
Post by LC_BOTT on Oct 19, 2018 20:49:38 GMT 1
Yea Rgv VJ22 front end and wheels and Metmachex arm. I thought Dud had added some decals to it ? I thought I'd seen some pics with red decals fitted ?? Dusty Seem to remember he messed up the decals trying to apply them himself, (or at least one side) so they got removed??
|
|
|
black
Oct 19, 2018 21:03:12 GMT 1
Post by dusty350 on Oct 19, 2018 21:03:12 GMT 1
Ah, didn't realise. Easily done though. I remember putting one side on an Lc tank - nightmare to get right, and never did the other side ! Dusty
|
|
|
black
Oct 29, 2018 21:04:09 GMT 1
Post by wallcraft on Oct 29, 2018 21:04:09 GMT 1
Interesting! Well i am sure Dave has sorted it for you, he knows his stuff. I had a 'tuned' 4LO that did nothing until 8000rpm then took off, but totally useless on the road! Mouse hi Mouse he sure has , just been out for a ride and the sound on full chat is something to hear , I did try to load up the Dyno graph but for some reason flickr just wants to post the same pic all the time (you might have guessed!) but its 72 at the rear wheel @10200 RPM Mart Wow that's impressive power figure, what's the engine spec?
|
|
|
Post by tipfinchy on Oct 29, 2018 21:23:51 GMT 1
|
|
|
black
Oct 29, 2018 21:33:13 GMT 1
Post by tipfinchy on Oct 29, 2018 21:33:13 GMT 1
|
|
|
black
Oct 29, 2018 21:37:03 GMT 1
Post by tipfinchy on Oct 29, 2018 21:37:03 GMT 1
that's what the previous owner had the spec listed as but he had never had it set up , only the pipes have been changed and Dave at muttsnuts getting it running nice
|
|
|
black
Oct 29, 2018 21:51:36 GMT 1
Post by wallcraft on Oct 29, 2018 21:51:36 GMT 1
Yep internals explain, very good indeed. Top draw.
|
|