|
|
Post by 17again on Oct 7, 2018 16:52:00 GMT 1
so i am looking to get one of these passo china clutch levers.
does anyone know what other lever will fit the clutch side?
cant seem to find rd listed.
|
|
|
|
Post by mouse on Oct 7, 2018 17:05:51 GMT 1
I don't think you will find anything listed for an RD, to old!
For what it is worth, i use 'Pazzo' levers on my hybrids, but i bought GSXR600 K1,2 or 3 clutch and brake perch's as Pazzo list levers for those. The perch's are plentiful, pretty cheap and very similar to RGV.
I personally would not trust a brake lever made in China, but i know people do and have no problems, but it is your choice
HTH
Mouse
|
|
|
|
Post by mickt1964 on Oct 7, 2018 17:28:26 GMT 1
There was a link a couple of months ago for a set of Chinese levers that fit LC's. I bought a set and they work great and seem to be good quality.
|
|
|
|
Post by badger1 on Oct 7, 2018 17:33:17 GMT 1
Bought cheap Chinese pazzo copies, no problems with them. Dropped my lc this year and the renthal bars and Chinese lever took a big wack. The bars bent like chocolate the lever didn’t bend or snap. Must admit I was surprised. Iv had pazzo’s before and back to back with the Chinese copys there isn’t a noticeable difference even the finish quality is good.
|
|
|
|
Post by mikee on Oct 7, 2018 19:07:55 GMT 1
|
|
|
|
Post by dusty350 on Oct 7, 2018 19:08:26 GMT 1
|
|
|
|
Post by cb250g5 on Oct 7, 2018 20:56:24 GMT 1
I've got some like these for my TDR. Fit & finish is spot on, can't fault them. Bike not on road yet, but I'm not expecting any issues. |
|
|
|
Post by ringding on Oct 7, 2018 21:08:40 GMT 1
I have some on my TDR too. I've been using them for 2years and they're great. I've ordered some for the LC too. I just can't get on with the standard levers on 80 bikes, the span is wrong for my hands.
|
|
|
|
Post by rigga on Oct 7, 2018 21:45:33 GMT 1
Chinese levers on mine too, fitted a gsxr perch for the clutch as I needed a brake lever for the master cylinder to match, no issues, and look well made.
|
|
|
|
Post by 17again on Oct 8, 2018 8:16:36 GMT 1
we will find out in a few weeks and i hope they fit lol
|
|
