|
|
Post by morgy on Sept 3, 2018 11:23:17 GMT 1
Any idea what a good set of RGV250 VJ22 wheels are worth in good condition??
|
|
|
|
Post by andy748 on Sept 3, 2018 11:27:47 GMT 1
£100 to me Morgy! 😏
|
|
|
|
Post by morgy on Sept 3, 2018 11:37:14 GMT 1
|
|
|
|
Post by andy748 on Sept 3, 2018 11:40:59 GMT 1
Just my opinion but a rear is at least £150, front £60-80, if with spindles and decent paint or powder coat, £300 all day long.
|
|
|
|
Post by kostas on Sept 3, 2018 17:54:59 GMT 1
Rears from the VJ22 are getting more expensive.
I got mine for 120 euros
Kostas
|
|
|
|
Post by dusty350 on Sept 3, 2018 19:17:34 GMT 1
I looked for ages for a VJ22 rear wheel. They seem to have dried up on Uk ebay. The ones that were available were in Australia. By the time you added international post and possible import fees, it made a used wheel too expensive. 2 NOS rears turned up on ebay last week, a black and a gunmetal. I bought the black one - it cost me £200. I bought a good front a few months back from a forum member, and paid £100 which I think is a fair price. Spindles/spacers/speedo drive/discs are extras that push the price up though. I have seen a few spindles on ebay for £30 +. I reckon a complete front and rear Rgv set up for a hybrid will cost you a grand now  Dusty |
|
|
|
Post by morgy on Sept 3, 2018 19:34:44 GMT 1
Thanks all... I only have the two wheels no speedo drive or spacers, just fitted with bearings etc Picked them up locally. As you say dusty i've only seen the AUS ones on ebay and not really seen that many up for sale thought it was worth an ask. I might keep them for my next hybrid  if there getting that hard to come by... |
|
|
|
Post by headcoats on Sept 3, 2018 20:07:59 GMT 1
I have a pair as I use KR1S wheels !
Not the best condition , will need powder coated
Collection only
About £200 ?
|
|
horace
Thrash Merchant
Posts: 456
|
Post by horace on Sept 3, 2018 20:48:04 GMT 1
I would think by the time you got the full rgv front and back ends swinging arm conversion , calipers , discs , tyres , hoses , etc etc you’ll be pushing nearer 2k , I’ve been gathering bits up for ages and dearnt add it all up!
|
|
|
|
Post by dusty350 on Sept 3, 2018 20:56:37 GMT 1
Yea, I think you are right. I wasn't including the swingarm, and the conversion to it ! Dusty  |
|
|
|
Post by spondon440 on Sept 3, 2018 21:11:34 GMT 1
I would think by the time you got the full rgv front and back ends swinging arm conversion , calipers , discs , tyres , hoses , etc etc you’ll be pushing nearer 2k , I’ve been gathering bits up for ages and dearnt add it all up! Your all playing at it, buy an Alfa spider and learn what spending is  Andy |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 3, 2018 22:22:26 GMT 1
I have a pair as I use KR1S wheels ! Not the best condition , will need powder coated Collection only About £200 ? Collection from where ? |
|
|
|
Post by midlifecrisisrd on Sept 4, 2018 9:16:19 GMT 1
I looked for ages for a VJ22 rear wheel. They seem to have dried up on Uk ebay. The ones that were available were in Australia. By the time you added international post and possible import fees, it made a used wheel too expensive. 2 NOS rears turned up on ebay last week, a black and a gunmetal. I bought the black one - it cost me £200. I bought a good front a few months back from a forum member, and paid £100 which I think is a fair price. Spindles/spacers/speedo drive/discs are extras that push the price up though. I have seen a few spindles on ebay for £30 +. I reckon a complete front and rear Rgv set up for a hybrid will cost you a grand now Dusty Very easily 1 - 2 grand, more if you want something a bit special I ended up paying 1k for forks and a pair of Andy's yokes I did cheat on the wheels mind. Went for gsxr400 rear and rf600 front (same fitment as rgv but 3.5 rim) You can pick them up for £50 each Steve |
|
|
|
Post by ritchic on Sept 4, 2018 10:37:44 GMT 1
I really cheated with the wheels an got 600 bandit wheels £80 for the pair. Rear fit with some work. Not sure what front would be like in rgv forks as mine are triumph forks
|
|
|
|
Post by midlifecrisisrd on Sept 4, 2018 12:00:40 GMT 1
I really cheated with the wheels an got 600 bandit wheels £80 for the pair. Rear fit with some work. Not sure what front would be like in rgv forks as mine are triumph forks Front is a bit of a mare Hub is narrower, bearings different, Speedo drive different and disc spacing is different You can guess who made the error after it was powder coated so had to make it fit lol Steve |
|
|
|
Post by ritchic on Sept 4, 2018 12:18:34 GMT 1
Yeah I had to make spacers used bandit Speedo drive but drilled it out had to get bearing outers taken down a few mm too. Also had to get discs off something crazy. But I think still saved loads on using them
|
|
|
|
Post by bazzer5115 on Sept 4, 2018 17:38:46 GMT 1
Hybrids are becoming too expensive to contemplate building now.
Shame, but a sign of the times!!!!
|
|
|
|
Post by tipfinchy on Sept 4, 2018 18:33:42 GMT 1
I think it was Saturday and being thick I forgot to put em in my watch list on ebay , but with five hours left to run a complete rgv vj22 front end ,forks wheel disks calipers brake lines and master , mud guard and yokes that was modified for rg5 was at £134
|
|
|
|
Post by midlifecrisisrd on Sept 4, 2018 18:52:45 GMT 1
£350 for a new pair on Ebay
I'm half tempted by the new fork uppers
Steve
|
|
|
|
Post by headcoats on Sept 7, 2018 19:20:24 GMT 1
Excuse the upside down pics but does this look like an RGV wheel ? |
|
|
|
Post by andy748 on Sept 7, 2018 20:16:01 GMT 1
It does mate, if my memory serves (without popping in the garage), AJE is RGV250, AJJ is early Bandito 600, but i've just dropped an early Bandit wheel in an RGV front end with no issues at all. I'll double check tomorrow for you. Andy.
|
|
|
|
Post by midlifecrisisrd on Sept 7, 2018 21:33:16 GMT 1
AJE is rgv but strangely I had one that was marked AJE but was a 400 bandit one and it was different
I'd say if the rgv spindle fits then it's rgv
Think the bandit had a smaller spindle
Steve
|
|
|
|
Post by headcoats on Sept 8, 2018 9:40:34 GMT 1
Haven't got a spindle but the verniers say the bearings are 17mm
|
|
|
|
Post by andy748 on Sept 8, 2018 16:19:40 GMT 1
Just checked in the garage, AJE on my RGV standard, AJJ on me YPVS hybrid but as i said went straight into the rgv forks. Andy.
|
|
|
|
Post by headcoats on Sept 9, 2018 10:22:58 GMT 1
OK then LOL
Whats just a front wheel worth then :-)
|
|
|
|
Post by dusty350 on Sept 9, 2018 10:37:34 GMT 1
I paid £100 for a good RGV front earlier this year. Dusty |
|
if there getting that hard to come by... 
