|
Post by doohanno1 on Jul 22, 2018 19:12:36 GMT 1
With all this talk of big bhp figures it gets one thinking..
Brilliant part where the kid cries to get ON the bike..
|
|
|
BHP
Jul 29, 2018 10:56:57 GMT 1
Post by 17again on Jul 29, 2018 10:56:57 GMT 1
Nice one.
My bike won’t wheelie off the throttle
|
|
|
BHP
Jul 29, 2018 12:40:01 GMT 1
Post by rich on Jul 29, 2018 12:40:01 GMT 1
Nice one. My bike won’t wheelie off the throttle Not even in first into the band?
|
|
|
BHP
Jul 29, 2018 15:08:57 GMT 1
Post by 17again on Jul 29, 2018 15:08:57 GMT 1
have tried it yet stilling running in.
|
|
|
BHP
Jul 29, 2018 22:32:07 GMT 1
via mobile
Post by ritchic on Jul 29, 2018 22:32:07 GMT 1
Mine won't wheelie off the throttle either. Tried everything. Only will with a bit of clutch
|
|
|
BHP
Jul 29, 2018 23:51:28 GMT 1
Post by donkeychomp on Jul 29, 2018 23:51:28 GMT 1
Give the bars a yank, she'll come up!
Alex
|
|
|
BHP
Jul 30, 2018 19:00:24 GMT 1
via mobile
steven likes this
Post by Tobyjugs on Jul 30, 2018 19:00:24 GMT 1
Eat less pies😁
|
|
|
BHP
Jul 30, 2018 19:02:42 GMT 1
Post by jon on Jul 30, 2018 19:02:42 GMT 1
Nice one. My bike won’t wheelie off the throttle Are you on about a 250 or a 350 as I see you have both. Jon
|
|
|
BHP
Jul 30, 2018 19:42:23 GMT 1
Post by 17again on Jul 30, 2018 19:42:23 GMT 1
Nice one. My bike won’t wheelie off the throttle Are you on about a 250 or a 350 as I see you have both. Jon the 350 jon. saying that it still has 250 pipes on it still waiting for new ones. the 250 is a lot slower and might upgrade it. make the r1z feel fast 10bhp more with tzr 28mm arbs on
|
|
|
BHP
Aug 3, 2018 0:14:53 GMT 1
Post by JonW on Aug 3, 2018 0:14:53 GMT 1
sit a bit further back... yank on bars and youre up n away!
|
|
|
BHP
Aug 3, 2018 1:03:10 GMT 1
Post by donkeychomp on Aug 3, 2018 1:03:10 GMT 1
Told ya lol
|
|
|
BHP
Aug 3, 2018 3:31:25 GMT 1
Post by bare on Aug 3, 2018 3:31:25 GMT 1
Nice one. My bike won’t wheelie off the throttle Not even in first into the band? Drop a tooth on the front sprocket. IF that doesn't work? Sell the damned thing
|
|
|
BHP
Aug 3, 2018 4:07:19 GMT 1
Post by steven on Aug 3, 2018 4:07:19 GMT 1
... A 4l0 that wont wheelie ? Get a set of the earlier ( more manly ) type barrels ! :-) Steven.
|
|
|
Post by rd350rob on Aug 3, 2018 8:00:23 GMT 1
....or eat lots more pies but sit further back.......
|
|
|
BHP
Aug 3, 2018 20:14:21 GMT 1
via mobile
Post by andrewm on Aug 3, 2018 20:14:21 GMT 1
I have dyno results of 120bhp back in the day it was a drag bike running a tuned engine and nitrous.
|
|
|
BHP
Aug 4, 2018 0:41:25 GMT 1
via mobile
Post by Tobyjugs on Aug 4, 2018 0:41:25 GMT 1
I have dyno results of 120bhp back in the day it was a drag bike running a tuned engine and nitrous. If you couldn't get that to wheelie you have eaten too many pies🤣😂😃😂
|
|
|
BHP
Aug 4, 2018 10:55:40 GMT 1
via mobile
Post by andrewm on Aug 4, 2018 10:55:40 GMT 1
The front end would not stay on the floor that’s when the extended swinger was added which still did not make much of a difference to the wheely factor
|
|
|
BHP
Aug 8, 2018 10:30:25 GMT 1
Post by philbert on Aug 8, 2018 10:30:25 GMT 1
I had a tuned 350 which would lift the front in 1st and 2nd no probs off the throttle when it can into the band.
|
|