|
Post by shaunyb63 on Jul 21, 2018 11:12:16 GMT 1
Expert help needed again, my clutch basket on 250lc doesn’t have the big o-ring that sits in the grove behind the gear and the back plate , part no on Fowler’s website is 93211-10232. Got all the damper rings that fit between the frictions and steels but not the this one. Question is what does it do and would it be essential to replace it, doesn’t look like the basket has ever been pulled apart because its still held together with what looks like original rivets, so can only assume it was never there or it’s been removed for whatever reason and just never replaced?It isn’t an expensive part and can be ordered from Fowler’s, but just wondered what your thoughts ? Many thanks , Shaun.
|
|
|
Post by oldelsieboy on Jul 21, 2018 11:15:58 GMT 1
Expert help needed again, my clutch basket on 250lc doesn’t have the big o-ring that sits in the grove behind the gear and the back plate , part no on Fowler’s website is 93211-10232. Got all the damper rings that fit between the frictions and steels but not the this one. Question is what does it do and would it be essential to replace it, doesn’t look like the basket has ever been pulled apart because its still held together with what looks like original rivets, so can only assume it was never there or it’s been removed for whatever reason and just never replaced?It isn’t an expensive part and can be ordered from Fowler’s, but just wondered what your thoughts ? Many thanks , Shaun. OEB
|
|
|
Post by jon on Jul 21, 2018 11:44:53 GMT 1
Interestingly the YPVS doesn’t show this part on Fowler’s website.
Perhaps they dropped it?
Anyone know of YPVS’s have them?
Jon
|
|
|
Post by shaunyb63 on Jul 21, 2018 13:10:14 GMT 1
Doesn’t look like the 250 has one then by the looks of that picture ?
|
|
|
Post by midlifecrisisrd on Jul 21, 2018 13:27:44 GMT 1
Interestingly the YPVS doesn’t show this part on Fowler’s website. Perhaps they dropped it? Anyone know of YPVS’s have them? Jon Every ypvs I have stripped (including 250's and early/late) have had the ring Steve
|
|
|
Post by 0h5h1t on Jul 21, 2018 13:34:18 GMT 1
Present on my 31k and 1ua engines
|
|
|
Post by bare on Jul 21, 2018 18:07:41 GMT 1
No ring on MY Valvie although it's an '87 and Not a UK market one
|
|
|
Post by JonW on Jul 22, 2018 13:36:56 GMT 1
Interestingly the YPVS doesn’t show this part on Fowler’s website. Perhaps they dropped it? Anyone know of YPVS’s have them? Jon Every ypvs I have stripped (including 250's and early/late) have had the ring Steve Same here, dont think ive got / had one here without one.
|
|
|
Post by JonW on Jul 22, 2018 13:38:54 GMT 1
Also how does the internal bush differ? These sound more like early/late LC differences as found by journos than actual parts for the same year imho. Mags get things wrong notoriously. One mag listed the F1 swingarm and clips as alloy... hmm...
|
|