|
|
Post by jessy03 on Jul 15, 2018 14:50:09 GMT 1
|
|
|
|
Post by midlifecrisisrd on Jul 15, 2018 16:22:52 GMT 1
Looks like one to me
Steve
|
|
|
|
Post by dusty350 on Jul 15, 2018 20:46:33 GMT 1
Hi Jess I would be interested in one if he is making a few  Dusty  |
|
|
|
Post by mouse on Jul 16, 2018 7:12:13 GMT 1
So would i
Mouse
|
|
|
|
Post by jessy03 on Jul 16, 2018 14:55:27 GMT 1
I’ll let you know as and when there ready
Jess
|
|
|
|
Post by dusty350 on Jul 17, 2018 7:42:12 GMT 1
Cheers Jessy Dusty |
|
|
|
Post by plumma on Jul 17, 2018 8:49:23 GMT 1
Yep!!
|
|
|
|
Post by badger1 on Jul 17, 2018 11:00:46 GMT 1
I’m interested to please
|
|
|
|
Post by rigga on Jul 17, 2018 12:02:49 GMT 1
What's the advantages over a billet machined one, over the standard which I presume is cast?
|
|
|
|
Post by midlifecrisisrd on Jul 17, 2018 12:52:09 GMT 1
What's the advantages over a billet machined one, over the standard which I presume is cast? Strength Billet a lot stronger than cast Steve |
|
|
|
Post by Tobyjugs on Jul 17, 2018 13:50:34 GMT 1
I would assume you could also design in a bit more strength in the billet version.
|
|
|
|
Post by rigga on Jul 17, 2018 14:16:51 GMT 1
OK, another dumb question .... I take it the standard cast ones fail? And having a stronger billet version is a good idea?
|
|
|
|
Post by midlifecrisisrd on Jul 17, 2018 14:30:02 GMT 1
OK, another dumb question .... I take it the standard cast ones fail? And having a stronger billet version is a good idea? They are fine on an rgv but the increased torque of a tuned 350 or big bore motor rips the bolt tabs off As tobyjugs says it would be a good idea to design the tabs with a few extra mm on them Steve |
|
|
|
Post by JonW on Jul 18, 2018 2:04:07 GMT 1
I’ll let you know as and when there ready Jess Jess, please also let me know about these. Im currently considering modding an RGV and would rather use a billet one. |
|
|
|
Post by JonW on Sept 13, 2018 7:24:26 GMT 1
Any news on this Jess?
|
|
|
|
Post by ukcalling on Sept 13, 2018 17:16:18 GMT 1
I'd be up for one too please!
Nick
|
|
|
|
Post by jessy03 on Sept 13, 2018 18:08:36 GMT 1
Still working on it, the fabricator is really busy at the minute, This is just a bit of pocket money for him so it’s as and when he can do it.
Jess
|
|
|
|
Post by JonW on Sept 14, 2018 1:15:39 GMT 1
no worries, just didnt want the idea to fade out with the summer lol
|
|
|
|
Post by plumma on Dec 6, 2018 22:40:55 GMT 1
Bump....
|
|
|
|
Post by urbantangleweed on Dec 7, 2018 0:24:40 GMT 1
I could be interested in one of these too.
|
|
