|
|
Post by philmill on Jan 26, 2018 12:54:59 GMT 1
Has anybody come across a company who can repair damaged pipes? I have Allspeeds on my project but ones is damaged through being slid down the road I'd say. I think it would need the whole section cut out and replaced, I guess its only a cone that needs rolling to match. There must be plenty of these damaged in peoples garages.
|
|
|
|
Post by cb250g5 on Jan 26, 2018 13:22:00 GMT 1
|
|
|
|
Post by Tobyjugs on Jan 26, 2018 14:27:57 GMT 1
It should be possible if you ask an exhaust builder
I had a pair of TSA's repaired after a big highside
They were repaired in Holland
|
|
|
|
Post by philmill on Jan 26, 2018 14:36:27 GMT 1
Thanks guys, I didnt realise Gibson are the makers, I'll contact them and ask, ill let you all know their reply.
|
|
|
|
Post by Tobyjugs on Jan 26, 2018 16:46:08 GMT 1
Anyone who makes expansion chambers should be able to fix them.
|
|
|
|
Post by ozzysbikes on Jan 28, 2018 0:14:01 GMT 1
I asked the same question but it is a Micron pipe with a dint and a scratch, any ideas who would repair that for me ? it wants the dint pulling out and I guess the scratches (courtesy of my son riding the bike !!) filling with braze before a rechrome
|
|
|
|
Post by barney on Jan 28, 2018 0:46:20 GMT 1
Thanks guys, I didnt realise Gibson are the makers, I'll contact them and ask, ill let you all know their reply. I asked Gibson a few months back about repairing a set of allspeeds and was told that they don’t offer repair only new pipes |
|
|
|
Post by 4l04ever on Jan 28, 2018 20:40:49 GMT 1
Thanks guys, I didnt realise Gibson are the makers, I'll contact them and ask, ill let you all know their reply. I asked Gibson a few months back about repairing a set of allspeeds and was told that they don’t offer repair only new pipes Customer service....  ?? |
|
|
|
Post by philmill on Jan 28, 2018 20:49:38 GMT 1
What's that these days......
|
|
|
|
Post by cb250g5 on Jan 28, 2018 21:14:10 GMT 1
They modded a set for me, some years back, whilst I waited, and another set took about a week to put bigger stingers in.
|
|
|
|
Post by barney on Jan 28, 2018 22:07:03 GMT 1
What's that these days...... When I was trying to sort my damaged allspeeds out a forum member Bryan (username) gave me a contact no for a chap called Clive who used to work for Gibson and he was prepared to help me out I haven’t got Clive’s no but pm Bryan he may help you out ive gone down a different route now and no longer have the allspeeds |
|
|
|
Post by barney on Jan 28, 2018 22:10:11 GMT 1
I asked Gibson a few months back about repairing a set of allspeeds and was told that they don’t offer repair only new pipes Customer service.... ?? I also asked if I could buy a cone section and I would get it welded by someone else and they said no as it would be associated with them ! I think perhaps the demand for new pipes outweighs little repair jobs maybe |
|
|
|
Post by philmill on Jan 29, 2018 11:14:45 GMT 1
Thanks Barney, I'll drop him a note, the other option will be looking out for one pipe I guess, mine are painted ones so maybe easier to find
|
|
??