|
|
Post by shaunthe2nd on Nov 30, 2017 23:01:17 GMT 1
Anyone had good or bad results fitting a Noboru head gasket? Supposed to be Japanese made. I usually use Athena ones but came across this one recently.
Feedback appreciated thanks. |
|
|
|
Post by Norbo on Nov 30, 2017 23:20:34 GMT 1
if you use instant as well im sure you will be fine with them
|
|
|
|
Post by Ozhammer on Dec 1, 2017 1:55:45 GMT 1
And there was me thinking that was Norbo’s Japanese brand name! 😂
|
|
|
|
Post by sparx on Dec 1, 2017 5:18:41 GMT 1
What about Stuart’s copper gasket?
|
|
|
|
Post by mattybeckett on Dec 1, 2017 12:51:39 GMT 1
And there was me thinking that was Norbo’s Japanese brand name! 😂 Not the only one lol. |
|
|
|
Post by steve h on Dec 1, 2017 22:37:33 GMT 1
I used then in the olden days on a 250, never had probs with them and reused them.
I.Deno's gaskets were ok.
|
|
|
|
Post by shaunthe2nd on Dec 2, 2017 19:05:41 GMT 1
Thanks fellas will risk it then!
|
|
|
|
Post by LC_BOTT on Dec 3, 2017 12:23:11 GMT 1
I prefer these to Athena ones, it was what I used to get from my Yamaha dealers 30+ years ago, don't remember any failures.
|
|
