hrc43
Weekend rider
Posts: 97
|
Post by hrc43 on Aug 31, 2006 18:01:50 GMT 1
finished the lc at last and its been stood for about 2 months. now there is 2 stroke oil all over the floor.its coming out of the feed pipes to the carbs it must be flowing thro the oil pump when the engines not running. its filling up the cylinders cause the thing wont start.any ideas dudes
|
|
|
Post by pablo on Aug 31, 2006 19:45:23 GMT 1
aint had that before mate...you got the little clips on the ends of all the pipes?...good place to start i reckon
|
|
|
Post by billbott on Aug 31, 2006 20:00:03 GMT 1
my oil tank had filled the bottom end when i first bought my lc, but it had been stood 3 years - think they call it gravity!! Try sealing the oil tank cap with cellophane to cause a vacuum and stop it flowing? Just remember to take it off when you start it up - this is really important!!!!
|
|
|
Post by Norbo on Sept 1, 2006 9:45:07 GMT 1
You will have to pore fuel down the spark plug caps and remove the pipes and kick it up so it blows the oil out . This is what i had to do when the same thing hapened to my little girls small crosser. then i had to remove the oil feed pipe every time i was'nt using it .
|
|
|
Post by pablo on Sept 1, 2006 19:55:06 GMT 1
so what is that? dodgy oil pump?
|
|
|
Post by Norbo on Sept 2, 2006 10:45:45 GMT 1
I think so . But on my bike is is a small 80 crosser so i cant just put a new one on , so i take the pipes of and put them on when i go out on it .
|
|