|
Post by vin on Aug 29, 2006 21:28:32 GMT 1
|
|
|
Post by mellow on Aug 29, 2006 21:33:03 GMT 1
dude they look like micron powers to me for a valve but may b for an lc if the brackets dont line up.............usually they are about an inch out..........u just elongate the hole on mount lengthways though not vertically or they will rub
|
|
|
Post by vin on Aug 29, 2006 21:41:00 GMT 1
I thought this mellow m8 but the distance they have to go is more than the bracket will allow! It looks as if it's been fitted on two types of model maybe with two holes drilled into the bracket and inch apart up and down It seems as thou the side stand spring stud will not allow the exhaust to be moved more out wards either?
|
|
|
Post by mellow on Aug 29, 2006 21:43:45 GMT 1
u av to bolt a bracket to the pipe then to the hanger.make ur own extra bracket if ya see wot i mean
|
|
bump
Thrash Merchant
I can see my house from here...
Posts: 489
|
Post by bump on Aug 29, 2006 21:46:01 GMT 1
Vin,
They look like they are meant for an LC.
You're right it's hard to tell from pics, but the proportions look pretty damn close to the ones I had for sale last week.
|
|
|
Post by vin on Aug 29, 2006 21:47:39 GMT 1
yep
|
|
|
Post by vin on Aug 29, 2006 21:50:54 GMT 1
thanks Bump, My suspicion is that they may be lc ones anyone have any that they could take some measurements
|
|
|
Post by mellow on Aug 29, 2006 21:59:12 GMT 1
i got sum lc allspeeds im fittin to me f2
|
|
|
Post by vin on Aug 29, 2006 22:01:59 GMT 1
show us some pictures then
|
|
|
Post by mellow on Aug 29, 2006 22:03:12 GMT 1
of wot? the pipes? or the bike?
|
|
|
Post by vin on Aug 29, 2006 22:20:20 GMT 1
both
|
|
|
Post by mellow on Aug 29, 2006 22:27:04 GMT 1
bikes in "my f2 pics look if ur bored" post in rebuild..............not got pic of allspeeds yet
|
|
|
Post by alibongo on Aug 30, 2006 8:57:37 GMT 1
I think i have the same ones BUT im not sure what model they are for as i had to "adjust" mine to fit also. I put spacers between the footrest hangers and the frame to stop the cans rubbing on the swingarm.
|
|
|
Post by vin on Aug 30, 2006 12:55:30 GMT 1
yep alibongo........I believe that's what I'll have to do
|
|
|
Post by alibongo on Aug 30, 2006 14:49:04 GMT 1
10mil spacers give about 2-3mil clearance at the swingarm. Plus, I think the brackets needed to be bent slightly. Good luck mate.
|
|