antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 28, 2017 9:54:42 GMT 1
Hi lads ,found out the forums are available using Tapatalk so here's a picture of my f2 I've been restoring, sunk a lot of money into it as you'll all know. Gone for the naked look as I prefer it to the fairings. Oh and yogi (matt) this is your old tankπ antos.
|
|
|
Post by Mr Kipling on Jun 28, 2017 9:57:07 GMT 1
Nice i like it ..
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 28, 2017 10:01:09 GMT 1
Thanks mate, I sold my 2011 blade I'd had from new last year, then bought this , and I don't miss the blade to be honest . Fantastic bikes mind but it was flat out everywhere I went. Not good. I've had some great help off lads on here too so really appreciate that. Thanks
|
|
|
Post by marky350 on Jun 28, 2017 10:34:13 GMT 1
Looks really nice Antos. Those pipes look in good nick had to do a lot of work on mine and they haven't come up as nice. What did you use for headlight and brackets? Agree they do look better naked. Left mine in half-way house mode for now with just the top fairing, but toying with idea to give it a Brazilian! As I really like the look of this model's half-fairing here but would have to cut down the mid-mid fairing panels. But would be different. Here's mine not quite as spanking yours, but nice to see 2 F2's back on the road this summer, happy riding. Mark
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 28, 2017 11:14:59 GMT 1
Hi mark, I was going to do just as you have in leaving the top fairing, as the parts to convert it are so expensive, so I managed to find an n2 bracket which was minus the top mounts (was only Β£40 though) then managed to weld some pieces onto it to enable my f2 clock mounts to be fitted. I've managed to source some n2 clock fronts so over the winter I'll need to sort that but for now it worksπ
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 28, 2017 11:31:14 GMT 1
Forgot to say mark, the headlight is a cheap copy from Ebay, it was Β£30! Better than paying 6 times as much for a genuine oneπ the cans are in good nick luckily but down pipes are bad so I've wrapped them. Oh and your bike looks aceπ
|
|
|
Post by petehodges on Jun 28, 2017 11:59:50 GMT 1
love the bike pics antos love the blue aswell yer taptalk is great had it a few years so easy too put pics on ill never use photobucket again
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 28, 2017 12:02:56 GMT 1
Ha I couldn't work out how to do it on photobucket Pete,
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 28, 2017 12:13:15 GMT 1
pic of the headlight
|
|
|
My f2
Jun 28, 2017 14:09:49 GMT 1
antos likes this
Post by wwwRD350LCnet on Jun 28, 2017 14:09:49 GMT 1
Nice bikes ! i Like it naked or only with the top fairing and the Brazilian solution is fine !
Xavier
|
|
|
My f2
Jun 28, 2017 18:04:16 GMT 1
antos likes this
Post by Yogi on Jun 28, 2017 18:04:16 GMT 1
Nice one Antos that looks sweet now
Matt
|
|
|
My f2
Jun 28, 2017 18:14:20 GMT 1
antos likes this
Post by boost on Jun 28, 2017 18:14:20 GMT 1
hi antos got to say it "absolutely bloody gorgeous" what a lovely bike and I thought the 31k looked nice but yours WOW
what are the front calipers off ??
bob
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 28, 2017 20:22:59 GMT 1
Hi bob, there from a tt600 triumph, fit straight onπ I did refurb the yam callipers but I need brakes and they simply weren't good enough especially coming from the blade I'm used to being able to stop lol
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 28, 2017 20:38:29 GMT 1
And thanks for your kind comments lads, much appreciated .
|
|
|
Post by Norbo on Jun 29, 2017 6:57:48 GMT 1
looks like brand new
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 29, 2017 7:03:49 GMT 1
Thanks norbo π
|
|
|
Post by allspeeds on Jul 4, 2017 21:43:05 GMT 1
That looks great mate, I have a white one with N2 light and clocks.
|
|
|
My f2
Jul 6, 2017 18:00:48 GMT 1
Post by chrisk01 on Jul 6, 2017 18:00:48 GMT 1
Hi, the red and black F2, nice job on the bottom fairing edge, did you get the middle pieces cut and make up the brackets? I just have the top fairing and was thinking about brackets for the lowers, but yours looks like a better solution.
|
|
|
My f2
Jul 6, 2017 18:10:52 GMT 1
Post by jon on Jul 6, 2017 18:10:52 GMT 1
Hi, the red and black F2, nice job on the bottom fairing edge, did you get the middle pieces cut and make up the brackets? I just have the top fairing and was thinking about brackets for the lowers, but yours looks like a better solution. I think you'll find its factory. Jon
|
|
|
My f2
Jul 8, 2017 19:24:21 GMT 1
Post by marky350 on Jul 8, 2017 19:24:21 GMT 1
Hi, the red and black F2, nice job on the bottom fairing edge, did you get the middle pieces cut and make up the brackets? I just have the top fairing and was thinking about brackets for the lowers, but yours looks like a better solution. I think you'll find its factory. Jon Hi Chriski, as Jon says its factory. That is the Brazilian half-faired model and looks really nice. Either need to cut the mid-panels down (pretty drastic unless you can find some cheap) or source some. The photo Xavier put up is from his website showing all the model variations - a great site for loads of info on LCs etc see here www.rd350lc.net/index.htmlSpecific shots on the Brazilian half-faired solution here www.rd350lc.net/page1YH-86.htm
|
|
|
My f2
Jul 9, 2017 6:16:12 GMT 1
Post by jon on Jul 9, 2017 6:16:12 GMT 1
I think you'll find its factory. Jon Hi Chriski, as Jon says its factory. That is the Brazilian half-faired model and looks really nice. Either need to cut the mid-panels down (pretty drastic unless you can find some cheap) or source some. The photo Xavier put up is from his website showing all the model variations - a great site for loads of info on LCs etc see here www.rd350lc.net/index.htmlSpecific shots on the Brazilian half-faired solution here www.rd350lc.net/page1YH-86.htm You could make something similar with cut down panels, but I think the originals had a recession the panel, and probably a rubber grommet setup like the fully faired models on the centre mount. Jon
|
|