antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 25, 2017 22:37:01 GMT 1
Guys bit of help please, got a f2 new powervalves , seals, cables. Sometimes it'll pull the red line sometimes it's holding back , now I've been chasing my tail a bit on the bugger so it's had new banshee coils new reed valves, carbs to bits till I'm sick of them, tank checked tap cleaned out lines the works. Can you still get the ypvs controller or am I best of getting a zeeltech thingy? No idea what's involved really I'm pretty certain it's an electrical issue now can't be out else! Thanks antos
|
|
|
Post by Mr Kipling on Jun 26, 2017 0:01:48 GMT 1
I know u,ve had the carbs apart a few times but u could always have crap caught up behind the brass balls , I,d remove these an clean them thoroughly , if its beyond ur capabilities , send em to someone like Muttsnuts on this forum who will sort them for u ..
|
|
|
Post by budgie on Jun 26, 2017 7:00:40 GMT 1
I know u,ve had the carbs apart a few times but u could always have crap caught up behind the brass balls , I,d remove these an clean them thoroughly , if its beyond ur capabilities , send em to someone like Muttsnuts on this forum who will sort them for u .. +1, Dave sorted my N2 carbs... ,and it made a huge difference.... I spent ages chasing an electrical fault which didn't exist... carbs properly cleaned and BOOM... job done.... and before Dave had done them, I'd cleaned them twice and had some other so allied professional do it too... but for me Dave is yer man... worth every penny... Gav
|
|
antos
Drag-strip hero
Posts: 298
|
Post by antos on Jun 26, 2017 9:04:43 GMT 1
Thanks lads, well I suppose it could be that, the original tank was very rusty with plenty of shit in it so I had to get a second hand one from matt on here. (yogi) Would a blockage behind these brass balls affect the flat out running? As that's the only problem I'm having. Thanks again. Antos
|
|
|
Post by Mr Kipling on Jun 26, 2017 10:11:56 GMT 1
Sure will .
|
|