|
Post by tige on Nov 8, 2015 13:09:51 GMT 1
Hi guy,s new here, Just saying hello. will be reading some threads and getting some info on RD,s, i have just purchased one, so i will be looking for some parts, mine has no exhausts or carburettor,s or any wiring,just bare bones frame and engine.
|
|
|
Post by iwantalc on Nov 8, 2015 13:25:12 GMT 1
welcome to the forum plenty of good reading and advice on here ,get up to 10 posts and put in a wanted ad im sure someone on here will have some of the parts you are looking for ..
|
|
|
Post by unrealedd on Nov 8, 2015 13:30:25 GMT 1
Hi and welcome, sounds like a good project, what model you got and have you had it long, enjoy the forum but be warned its all very addictive. Atb and good luck with the build. Oh and pics would be nice we all love pictures.
|
|
|
Post by Delbert on Nov 8, 2015 13:51:30 GMT 1
Hi & welcome , sounds like many late nights in the shed !!
|
|
|
Post by sandpiper on Nov 8, 2015 14:32:39 GMT 1
hi and welcome
|
|
|
Post by carioca656 on Nov 8, 2015 15:15:23 GMT 1
hi and welcome
|
|
|
Post by yamark on Nov 8, 2015 16:15:15 GMT 1
A warm welcome to the forum. You should be able to get the parts you need. Looking forward to some pics of your bike and seeing your progress. Really nice bunch on here.
Regards Mark
|
|
|
Post by Bertie Wooster on Nov 8, 2015 16:46:15 GMT 1
Hello
|
|
|
Post by arrow on Nov 8, 2015 17:31:42 GMT 1
Welcome to the forum.
|
|
|
Post by 0h5h1t on Nov 8, 2015 17:34:10 GMT 1
Welcome aboard mate, if you reply to each member that says hi you'll have 10 posts in no time and can get your wanted ads posted :-)
Be careful buying from eBay too there is a less than honest seller who apparently earns money for his missus.
|
|
|
Post by dusty350 on Nov 8, 2015 19:21:46 GMT 1
Hi Welcome to the forum mate. Sounds like you have some work to do !! Good luck, and enjoy. It's worth the effort once it's up and running Regards Dusty
|
|
|
Post by russie on Nov 8, 2015 20:38:00 GMT 1
Welcome in. You're wise to do plenty reading before you go looking for parts. Early 350 carbs are not as good as later ones, LC looms are obsolete now and some pattern ones are not 100% either. Assuming it's an LC you've got? This is the place to do your homework though! Let's see some pics, enjoy!
|
|
|
Post by seanclarky on Nov 8, 2015 20:41:27 GMT 1
Welcome to the forum, there's a really helpful bunch of guys on here, good luck with the rebuild
|
|
|
Post by Gunny on Nov 8, 2015 20:53:04 GMT 1
Hiya
|
|
|
Post by tuono1000r on Nov 8, 2015 21:22:28 GMT 1
Welcome along fella
|
|
|
Post by Yogi on Nov 8, 2015 21:41:39 GMT 1
Hi Mate and welcome to the best forum If it makes you feel better this was a frame and bare engine cases 8 months ago Good luck Matt
|
|
weavermiff
Newbe
Hi Can anyone tell me what the part number is for a water pump bearing on a 350lc 4lo model.
Posts: 5
|
Post by weavermiff on Nov 8, 2015 22:55:48 GMT 1
Hi I have a 350lc and was wondering the cost involved rebuilding the oil pump? Any advice much appreciated.
|
|
|
Post by arrow on Nov 8, 2015 23:10:39 GMT 1
Hi I have a 350lc and was wondering the cost involved rebuilding the oil pump? Any advice much appreciated. Welcome to the forum. Pm sent.
|
|
|
Post by seanclarky on Nov 9, 2015 0:04:24 GMT 1
We'll worth having the oil pump done by gary(arrow)
|
|
|
Post by arrow on Nov 9, 2015 0:06:17 GMT 1
Hi Mate and welcome to the best forum If it makes you feel better this was a frame and bare engine cases 8 months ago Good luck Matt And looks stunning if I may say so.
|
|
|
Post by beardy on Nov 9, 2015 9:12:27 GMT 1
welcome mate.
|
|
|
Post by Norbo on Nov 9, 2015 10:22:28 GMT 1
welcome to the forum . got any pics of your bike mate
|
|