|
|
Post by fifty50 on Oct 3, 2015 19:20:36 GMT 1
Sent my standard 4L1 seat to Roger Dennis yesterday for him to convert it to a guiliari style seat, has anybody else had this done or what type of seat apart from standard are you using, has anybody done a seat with a race type hump have seen them for the ypvs, just looking for ideas really when I spoke to roger he said he could do most types of seat.
|
|
|
|
Post by oldelsieboy on Oct 3, 2015 19:39:42 GMT 1
Sent my standard 4L1 seat to Roger Dennis yesterday for him to convert it to a guiliari style seat, Hmmmmm, he wouldn't have been my first choice, or second, not even third  OEB |
|
|
|
Post by rich on Oct 3, 2015 19:55:18 GMT 1
And I would think very hard about going for a hump type seat as I reckon it would look crap. I'm not even keen on the YPVS ones to be honest!
|
|
|
|
Post by twostrokejoe on Oct 3, 2015 20:36:47 GMT 1
Who would you send your seat to for a first class finish Cheers.
|
|
|
|
Post by iwantalc on Oct 3, 2015 20:54:42 GMT 1
Sent my standard 4L1 seat to Roger Dennis yesterday for him to convert it to a guiliari style seat, Hmmmmm, he wouldn't have been my first choice, or second, not even third OEB who would you recomend to do this conversion to a standard seat got a standard seat might get done plus do you know rough cost to have this done ta oeb ..des |
|
|
|
Post by LC_BOTT on Oct 4, 2015 7:07:15 GMT 1
I know Gully seats are hard to come by, but a converted one always looks like a fat blokes been sitting on it for years,  the 'shape' of the Gully seat is in the rear plastic base, so I never feel it can be replicated from a standard one?? I'd always thought about having a base plastic welded to get nearer the 'classic look' |
|
|
|
Post by oldelsieboy on Oct 4, 2015 8:30:15 GMT 1
Hmmmmm, he wouldn't have been my first choice, or second, not even third OEB who would you recomend to do this conversion to a standard seat got a standard seat might get done plus do you know rough cost to have this done ta oeb ..des They all look a bit naff as LC_BOTT has previously mentioned, save your pennies & buy an original. OEB |
|
yozzer
L plate rider.
Posts: 16 
|
Post by yozzer on Oct 4, 2015 20:56:58 GMT 1
HI I just bought my ypvs recently and its had a fancy recover done white/red with embroided YPVS on centre of pillion area
I cant make my mind up if I like it what do you think if you see it on my tiny avatar photo
|
|
yozzer
L plate rider.
Posts: 16
|
Post by yozzer on Oct 4, 2015 20:57:39 GMT 1
will try and add better photo
|
|
|
|
Post by twostrokebrit on Oct 4, 2015 23:08:48 GMT 1
it looks good in the avatar ,but bigger pics would be nice.  |
|
|
|
Post by fifty50 on Oct 4, 2015 23:18:54 GMT 1
thanks all for your comments, decisions! decisions!
|
|
|
|
Post by Tobyjugs on Oct 5, 2015 18:32:07 GMT 1
I don't really like embossed seat. It makes the bike look less purposeful but that's only my opinion
Probably good for a show bike
|
|
|
|
Post by skydemon on Oct 5, 2015 19:56:13 GMT 1
I had my standard one recovered in alcantara and stitched to look like the original. I also have a Giuliari and a Giuliari with a hump. Will post the hump ic tomorrow x  |
|
|
|
Post by skydemon on Oct 5, 2015 19:58:01 GMT 1
|
|
|
|
Post by fifty50 on Oct 5, 2015 20:21:12 GMT 1
very nice, the seats and the bike.
cheers
|
|
|
|
Post by skydemon on Oct 6, 2015 18:07:00 GMT 1
I'll try and sort the hump seat tomorrow. Just been busy. Sorry
|
|
|
|
Post by fifty50 on Oct 6, 2015 23:02:10 GMT 1
I'll try and sort the hump seat tomorrow. Just been busy. Sorry ok, ta |
|
|
|
Post by shaunthe2nd on Oct 6, 2015 23:15:19 GMT 1
Standard for me!
|
|
|
|
Post by yamman1066 on Oct 7, 2015 9:54:18 GMT 1
gully looks better
|
|
|
|
Post by oldelsieboy on Oct 7, 2015 10:15:09 GMT 1
You could always have one like this LOL  OEB |
|
|
|
Post by wallcraft on Oct 7, 2015 10:19:03 GMT 1
Yeh I think I've seen them in dfs 5 years interest free.
Mark.
|
|
|
|
Post by JonW on Oct 7, 2015 12:30:17 GMT 1
PMSLMAO!  |
|
|
|
Post by skydemon on Oct 7, 2015 18:07:05 GMT 1
Ok can't show you the hump seat as its a 31K and I have a 4L0 :-(
|
|
|
|
Post by fifty50 on Oct 7, 2015 18:15:52 GMT 1
You could always have one like this LOL OEB Kim Kardashian would be proud of that booty!  |
|
|
|
Post by midlifecrisisrd on Oct 7, 2015 18:41:49 GMT 1
Your lucky
I emailed Roger to get my ypvs cover fitted and he rubber eared my email. Not as if I haven't used him before, had him do a few seats.
F*ck it, sent it to Tony archer now
Steve
|
|
|
|
Post by LC_BOTT on Oct 7, 2015 19:38:45 GMT 1
How about this little beauty, very comfortable, just looks pants  |
|
|
|
Post by twostrokebrit on Oct 7, 2015 20:16:14 GMT 1
will try and add better photo hurry up i am gagging to see it |
|
yozzer
L plate rider.
Posts: 16
|
Post by yozzer on Oct 7, 2015 21:06:41 GMT 1
|
|
|
|
Post by twostrokebrit on Oct 7, 2015 22:23:15 GMT 1
looks good in the red n white to match the bike. |
|
|
|
Post by shaunthe2nd on Oct 7, 2015 22:36:37 GMT 1
How about this little beauty, very comfortable, just looks pants I've been out with a few women who match that description! lol |
|
the 'shape' of the Gully seat is in the rear plastic base, so I never feel it can be replicated from a standard one?? I'd always thought about having a base plastic welded to get nearer the 'classic look'
