|
Post by looey on Apr 3, 2015 13:38:09 GMT 1
Can anyone tell me the length (not incl. the head), thread & pitch of the 2x bolts that hold the tie bars to the underneath of the engine please.
Ta
|
|
|
Post by midlifecrisisrd on Apr 3, 2015 13:51:03 GMT 1
From memory they are m10 X 1.25 and 45mm long
Steve
|
|
|
Post by Trubrit on Apr 3, 2015 14:25:53 GMT 1
As Steve Says M10 x 1.25 .. . .
|
|
|
Post by midlifecrisisrd on Apr 3, 2015 15:00:53 GMT 1
As Steve Says M10 x 1.25 .. . . Oh no measured up a bit short Story of my life Steve
|
|
|
Post by looey on Apr 3, 2015 16:31:31 GMT 1
Cheers lads, I'll see if I can find something in-stock that's suitable.
They're only £2.36 new from Yamaha, it's just the agg of ordering etc., especially if I've got something here that fits.
|
|