Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 25, 2015 6:39:52 GMT 1
Morning all.....
Looking to get a new crank for the LC - was wondering if anyone could recommend anywhere? Have seen the ones from PJME,FIREFOX RACING - was wondering if anybody has bought one of these or could guide me to another source?
Cheers Nick
|
|
|
Post by Delbert on Feb 25, 2015 7:52:26 GMT 1
Morning I believe norbo does an exchange crank On here
|
|
|
Post by lcyoungboy on Feb 25, 2015 9:39:15 GMT 1
I got an exchange crank from norbo..pjme are also highly recommended dave
|
|
|
Post by 4l04ever on Feb 25, 2015 15:52:46 GMT 1
PJME are usually good, but if anything goes wrong they are difficult to deal with and take time to resolve things. They do eventually sort issues out, but seems to take longer than you would expect. I personally know of two people who had issues with cranks from there.
Try Norbo, or Grampian.
|
|
|
Post by pistanbroke on Feb 25, 2015 18:51:18 GMT 1
Grampian , ive used em in past wi no issues
|
|
|
Post by 137d on Feb 25, 2015 18:56:42 GMT 1
Grampian 0151 931 5009
|
|
|
Post by huggy76 on Feb 25, 2015 19:18:30 GMT 1
Another one for Grampian
|
|
|
Post by jollyjoiner on Feb 25, 2015 20:34:34 GMT 1
I had one from Norb
|
|
|
Post by billbott on Feb 25, 2015 20:50:29 GMT 1
Don't bother with Firefox. They sorted a KX125 barrel for me a couple of years back. Told me it was ready for collection so I drove 50 miles to pick it up and it wasn't. They posted it to me the week after but half the bits were missing.....
|
|
|
Post by dave1963 on Feb 25, 2015 21:00:15 GMT 1
I got mine from norbo very good
|
|
|
Post by howard on Feb 25, 2015 21:26:36 GMT 1
Defo don't use Firefox , lots of mates with bad history and my big bore kit should have been two weeks in the making and 330cc , I got fed up and had a mate collect it half done 3 months later , and it came back 282cc.
|
|
|
Post by wallcraft on Feb 26, 2015 9:42:07 GMT 1
I have used Grampian a few times now, would'nt use any one else.
|
|
|
Post by ringdingding on Feb 26, 2015 9:49:41 GMT 1
same here, I think I've had 5 YPVS cranks done at Grampian, wouldn't use anyone else.
|
|
|
Post by alastairh on Feb 26, 2015 13:23:33 GMT 1
PJME have been spot on with me twice. Good advice and service.Prices reasonable.
|
|