|
|
Post by midlifecrisisrd on Sept 30, 2014 18:01:43 GMT 1
Noticed when I was removing my rgv front spindle that the wheel was moving a bit so turns out it is slightly bent where the threads start so not wanting to risk an eBay one that would also be bent I ordered a new one
Seventy facking three facking quid.
Steve
|
|
|
|
Post by bananaman on Sept 30, 2014 18:08:11 GMT 1
Did you try Cupar Motorcycles, the RGV was on a classic discounted rate for spares in the summer time, i got some cracking discounts on parts for mine :-)
Gary
|
|
|
|
Post by midlifecrisisrd on Sept 30, 2014 18:19:46 GMT 1
Afraid not.
Too late now
Steve
|
|
|
|
Post by steeley on Sept 30, 2014 18:19:49 GMT 1
oh years ago busted a emulsion tube in a Suzuki rgv 250 carb cost I think 37 quid . nice
|
|
|
|
Post by Eyrey1 on Sept 30, 2014 18:53:18 GMT 1
what about £370 for a two stroke oil pump for an nsr250 mc21
|
|
|
|
Post by arrow on Sept 30, 2014 19:02:22 GMT 1
I bought the swing arm tube to the lc, couple of years back £122. And a clutch basket £270!
|
|
|
|
Post by midlifecrisisrd on Sept 30, 2014 19:05:25 GMT 1
The things we end up paying for.
Had the same with my fzs 1000
Exup cables £180
Exup paddle valve £470
2 × fazer decals on the fairing £198
Steve
|
|
|
|
Post by arrow on Sept 30, 2014 19:10:24 GMT 1
The things we end up paying for. Had the same with my fzs 1000 Exup cables £180 Exup paddle valve £470 2 × fazer decals on the fairing £198 Steve Must be some fancy paddle valve.  |
|
|
|
Post by midlifecrisisrd on Sept 30, 2014 19:14:55 GMT 1
The things we end up paying for. Had the same with my fzs 1000 Exup cables £180 Exup paddle valve £470 2 × fazer decals on the fairing £198 Steve Must be some fancy paddle valve. It's some weird alloy, think cardboard would be heavier. Managed to pick a new one up from Israel for just over a ton just to find it was not the problem, was the mounting flange that was bent. It's over 100 quid and the cables have stretched but will make an adapter to take up the slack Steve |
|
|
|
Post by arrow on Sept 30, 2014 19:20:54 GMT 1
My clutch basket was a good example, until it fell off the bench and broke a tang off!  |
|
|
|
Post by midlifecrisisrd on Sept 30, 2014 19:22:53 GMT 1
My clutch basket was a good example, until it fell off the bench and broke a tang off! Ouch Done that kind of thing before, standing staring at it in disbelief Steve |
|
|
|
Post by arrow on Sept 30, 2014 19:25:17 GMT 1
My clutch basket was a good example, until it fell off the bench and broke a tang off! Ouch Done that kind of thing before, standing staring at it in disbelief Steve I know, I kept saying that expression that rhymes with clucking bell. |
|
|
|
Post by Eyrey1 on Sept 30, 2014 20:44:42 GMT 1
2 complete yam pistons for tzr250 3xv 320 quid
|
|
