|
|
Post by messer on Sept 22, 2014 18:20:25 GMT 1
Just fired up my n1 for the first time since rebuild and it is dropping out a cylinder. First it was the right and now the left.. plus it seems a bit heavy on the Rev but I'm putting this down to excessive oil in the case from the rebuild..
Any ideas?
|
|
|
|
Post by kostas on Sept 22, 2014 20:51:34 GMT 1
Sounds like an electrical issue.
Could the coil cause this?
|
|
|
|
Post by messer on Sept 22, 2014 21:04:51 GMT 1
Yeh seems like it to me too. Just cleaned uo the coil connector and will clean the plugs tomorrow arm nd retry. I was thinking that maybe the plug has fouled due to the build oil..
|
|
|
|
Post by bare on Sept 23, 2014 20:22:57 GMT 1
Possibly a weak spark.. iffy connectors etc.
BUT remember on these that Both plugs fire simultaneously.
As in BOTH must fire or Neither will.
|
|
