|
Post by billbott on Sept 1, 2014 22:41:31 GMT 1
Everyone knows the obvious differences between the 250 & 350lc's but I have stumbled across another: The sidestand bolt on the 250 has a 10mm shank and an M8 thread, the 350 has a 12mm shank with an M10 thread. Obviously the frame bracket therefore has a 10mm hole or 12mm. Guess which I bought for my 4L1? Ordered the correct one now, two different part numbers..... Just sayin.....
|
|
|
Post by Yogi on Sept 1, 2014 22:46:23 GMT 1
I'm guessing the wrong one,lol
|
|
|
Post by LC_BOTT on Sept 1, 2014 23:46:32 GMT 1
But.... I've just taken a sidestand from a 350 and fitted it to my 250, used the 250 bolt/nut etc
maybe it was a year thing?
|
|
|
Post by JonW on Sept 2, 2014 0:56:15 GMT 1
Im wondering if its a year thing, I bought a new bolt for a 350 and it went right into my 250 frame.
|
|
|
Post by billbott on Sept 2, 2014 7:08:24 GMT 1
Maybe a year thing, but two different part numbers?
|
|
|
Post by 4l04ever on Sept 2, 2014 12:38:06 GMT 1
What are the two part numbers?
All the ones I have seen have had M8 threads, unless they get damaged and drilled /retapped to M10?
|
|
|
Post by billbott on Sept 3, 2014 22:20:41 GMT 1
I'm picking up the 250 bolt at weekend so I will post the two part numbers when I get it.
|
|