|
|
Post by JonW on Jul 2, 2014 8:44:49 GMT 1
Ive always fitted my Zeels with no fuse, but since I was fitting a 3A to my Koso gauge feed I wondered if i should fit one to the Zeeltronic as well... any thoughts?
|
|
|
|
Post by midlifecrisisrd on Jul 2, 2014 9:30:41 GMT 1
I powered mine off the 5a ypvs circuit
Steve
|
|
|
|
Post by markhoopy on Jul 2, 2014 9:48:29 GMT 1
Me too ..
|
|
|
|
Post by JonW on Jul 2, 2014 13:11:26 GMT 1
LOL, The one Im thinking about doing is on an LC so no YPVS circuit LOL. Still the good news is that I did think 5A would be the fuse I would use. Sounds like I can do it without killing anything, phew! Thanks guys.
|
|
|
|
Post by 4l04ever on Jul 2, 2014 14:14:31 GMT 1
I fitted a 6-way fuse box. I put a 10 amp fuse in each one. I wired the first two together in parallel for the main fuse, so that makes a 20 amp fuse.
The extra 10amp fuse is now used to power my Zeeltronic and my temperature gauges. :-)
|
|
